SKF 2200 E-2RS1TN9 10 mm ID 2 Row Ball Bearing -, 30 mm OD
- N° de stock RS:
- 285-1349
- Référence fabricant:
- 2200 E-2RS1TN9
- Fabricant:
- SKF
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
41,80 €
(TVA exclue)
50,58 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 93 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 41,80 € |
| 5 - 9 | 40,15 € |
| 10 - 24 | 39,30 € |
| 25 + | 38,47 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 285-1349
- Référence fabricant:
- 2200 E-2RS1TN9
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Inside Diameter | 10mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 30mm | |
| Race Width | 14mm | |
| Ball Material | Steel | |
| Cage Material | Non-Metallic | |
| Number of Rows | 2 | |
| Static Load Rating | 1.18kN | |
| Internal Clearance | CN | |
| Dynamic Load Rating | 5.53kN | |
| Standards/Approvals | No | |
| Bore Type | Parallel | |
| Series | 2200 | |
| Limiting Speed | 17000rpm | |
| Bearing Type | Self-Aligning | |
| Race Type | Plain | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Inside Diameter 10mm | ||
Product Type Ball Bearing | ||
Outside Diameter 30mm | ||
Race Width 14mm | ||
Ball Material Steel | ||
Cage Material Non-Metallic | ||
Number of Rows 2 | ||
Static Load Rating 1.18kN | ||
Internal Clearance CN | ||
Dynamic Load Rating 5.53kN | ||
Standards/Approvals No | ||
Bore Type Parallel | ||
Series 2200 | ||
Limiting Speed 17000rpm | ||
Bearing Type Self-Aligning | ||
Race Type Plain | ||
Statut RoHS : Exempté
SKF Self Aligning Ball Bearing, Plain Race Type, 10 mm ID - 2200 E-2RS1TN9
This ball bearing from SKF generates very little friction, making it an ideal option for high-speed operations. As it's a self-aligning bearing, it can accommodate misalignment and shaft deflections without these affecting performance. The bearing comes with contact seals on both sides to protect it from dirt and grease, and to extend its life. As it comes pre-greased, it doesn't need much maintenance. The cage of this ball bearing is made from fibreglass-reinforced polyamide, which is an extremely tough material. This makes it well-suited to handling heavy loads.
• Parallel cage type
• Dynamic load rating of 5.53 kN
• Static load rating of 1.18 kN
• Sealed end type
• Two rows
• Plain race type
• Inner diameter of 10 mm
• Outer diameter of 30 mm
• Width of 14 mm
Application Information
• Textile industry, such as yarn spindles
• Machinery industry
• Agriculture
What kind of seal is used on this self-aligning ball bearing?
This bearing uses quality, steel-reinforced NBR (nitrile rubber) sealing that's oil-resistant and non-wearing. The bearing is sealed for life and shouldn't be heated above +80°C before mounting.
Liens connexes
- SKF 2206 E-2RS1TN9/C3 30 mm ID 2 Row Ball Bearing -, 62 mm OD
- SKF 2306 E-2RS1TN9 30 mm ID 2 Row Self-Aligning Ball Bearing -, 72 mm OD
- SKF 2206 E-2RS1TN9 30 mm ID 2 Row Self-Aligning Ball Bearing -, 62 mm OD
- SKF 2213 E-2RS1TN9 65 mm ID 2 Row Ball Bearing -, 120 mm OD
- SKF 2210 E-2RS1TN9 50 mm ID 2 Row Ball Bearing -, 90 mm OD
- SKF 2201 E-2RS1TN9 12 mm ID 2 Row Ball Bearing -, 32 mm OD
- SKF 2202 E-2RS1TN9 15 mm ID 2 Row Ball Bearing -, 35 mm OD
- SKF 2203 E-2RS1TN9 17 mm ID 2 Row Ball Bearing -, 40 mm OD