FAG 6204-C-2Z-C3 V 1 Row Ball Bearing - 20 mm ID, 47 mm OD
- N° de stock RS:
- 260-0872
- Référence fabricant:
- 6204-C-2Z-C3 V
- Fabricant:
- FAG
Sous-total (1 unité)*
7,04 €
(TVA exclue)
8,52 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 14 unité(s) expédiée(s) à partir du 21 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 7,04 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 260-0872
- Référence fabricant:
- 6204-C-2Z-C3 V
- Fabricant:
- FAG
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | FAG | |
| Inside Diameter | 20mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 47mm | |
| Race Width | 14mm | |
| Cage Material | Steel Sheet Metal | |
| Ball Material | Steel | |
| End Type | Closed | |
| Number of Rows | 1 | |
| Static Load Rating | 6.6kN | |
| Internal Clearance | C3 | |
| Dynamic Load Rating | 14.7kN | |
| Series | Generation C | |
| Bore Type | Cylindrical | |
| Standards/Approvals | No | |
| Limiting Speed | 20600rpm | |
| Race Type | Plain | |
| Bearing Type | Single Row Deep Groove Ball | |
| Sélectionner tout | ||
|---|---|---|
Marque FAG | ||
Inside Diameter 20mm | ||
Product Type Ball Bearing | ||
Outside Diameter 47mm | ||
Race Width 14mm | ||
Cage Material Steel Sheet Metal | ||
Ball Material Steel | ||
End Type Closed | ||
Number of Rows 1 | ||
Static Load Rating 6.6kN | ||
Internal Clearance C3 | ||
Dynamic Load Rating 14.7kN | ||
Series Generation C | ||
Bore Type Cylindrical | ||
Standards/Approvals No | ||
Limiting Speed 20600rpm | ||
Race Type Plain | ||
Bearing Type Single Row Deep Groove Ball | ||
- Pays d'origine :
- PT
Schaeffler Generation C Series Ball Bearing, 20mm Inside Diameter, 47mm Outside Diameter - 6204-C-2Z-C3 >V
This ball bearing is a sealed, single-row deep-groove component designed to support radial loads and enable rotary motion in industrial assemblies. It is intended for use where compact, sealed bearings are required for rotations at elevated speeds within typical operating temperatures encountered in automation and electrical machinery.
Features & Benefits
• 20600 r/min limiting speed enables high-speed operation
• 14.7 kN dynamic rating supports heavy radial duty
• 6.6 kN static rating maintains positional integrity at rest
• Steel sheet-metal cage offers Durable ball guidance
• Closed double-seal protects internal elements from contamination
• 14.7 kN dynamic rating supports heavy radial duty
• 6.6 kN static rating maintains positional integrity at rest
• Steel sheet-metal cage offers Durable ball guidance
• Closed double-seal protects internal elements from contamination
**Applications**
• Suitable for spindle drives in small automation systems
• Ideal for cooling fans in electronic enclosures
• Used for motor shafts in electric drive units
• Can be used for precision rollers in conveyor modules
• Ideal for cooling fans in electronic enclosures
• Used for motor shafts in electric drive units
• Can be used for precision rollers in conveyor modules
What shaft shoulder and housing shoulder dimensions must I check for mounting?
Ensure the shaft shoulder diameter meets the minimum 25.6mm requirement and the housing shoulder does not exceed 41.4mm to achieve correct axial location.
What temperature range can the bearing operate within?
It is rated for operation from -20°C up to 120°C, permitting use across typical industrial thermal environments.
How should I consider fillet and chamfer constraints during installation?
The maximum allowable fillet radius at mating surfaces is 1mm and the minimum chamfer is 1mm to avoid interference with ring edges.
What are the rotational endurance considerations for fatigue performance?
The bearings radial fatigue limit is 455 N, which indicates the threshold for long-term material fatigue under cyclic loading.
What installation clearances relate to reference running speed?
The reference running speed is 18,100 r/min
use this when assessing lubrication regimes and thermal growth for continuous operation.
Liens connexes
- FAG 6204-C-2Z-C3 1 Row Ball Bearing - 20 mm ID, 47 mm OD
- FAG 6204-C-2Z 1 Row Ball Bearing - 20 mm ID, 47 mm OD
- FAG 6204-C-2Z>V 1 Row Ball Bearing - 20 mm ID, 47 mm OD
- SKF 6204-2Z/C3 1 Row Ball Bearing - 20 mm ID, 47 mm OD
- FAG 6204-C-2HRS-C3 1 Row Ball Bearing - 20 mm ID, 47 mm OD
- RS PRO 6204-2Z/C3 1 Row Ball Bearing - 20 mm ID, 47 mm OD
- FAG 6204-C-2HRS-C3>V 1 Row Ball Bearing - 20 mm ID, 47 mm OD
- FAG 6303-2Z-C3 1 Row Ball Bearing - 17 mm ID, 47 mm OD
