SKF 3311 ANR 2 Row Ball Bearing - 55 mm ID, 120 mm OD 49.2 mm Race Width
- N° de stock RS:
- 233-0636
- Référence fabricant:
- 3311 ANR
- Fabricant:
- SKF
Sous-total (1 unité)*
543,52 €
(TVA exclue)
657,66 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 16 décembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 543,52 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 233-0636
- Référence fabricant:
- 3311 ANR
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Ball Bearing | |
| Inside Diameter | 55mm | |
| Outside Diameter | 120mm | |
| Race Width | 49.2mm | |
| Cage Material | Sheet Metal | |
| Ball Material | Steel | |
| End Type | Open | |
| Number of Rows | 2 | |
| Contact Angle | 30° | |
| Internal Clearance | C3 | |
| Static Load Rating | 81.5kN | |
| Dynamic Load Rating | 112kN | |
| Series | 3 Medium | |
| Bore Type | Parallel | |
| Standards/Approvals | No | |
| Limiting Speed | 5300rpm | |
| Bearing Type | Double Row Angular Contact Ball | |
| Race Type | Plain | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Ball Bearing | ||
Inside Diameter 55mm | ||
Outside Diameter 120mm | ||
Race Width 49.2mm | ||
Cage Material Sheet Metal | ||
Ball Material Steel | ||
End Type Open | ||
Number of Rows 2 | ||
Contact Angle 30° | ||
Internal Clearance C3 | ||
Static Load Rating 81.5kN | ||
Dynamic Load Rating 112kN | ||
Series 3 Medium | ||
Bore Type Parallel | ||
Standards/Approvals No | ||
Limiting Speed 5300rpm | ||
Bearing Type Double Row Angular Contact Ball | ||
Race Type Plain | ||
- Pays d'origine :
- DE
The SKF double row angular contact ball bearing has 81.5 kN basic static load rating(Co) and 112 kN basic dynamic load rating. It has snap ring groove in the outer ring with appropriate snap ring. This bearing corresponds to two single row angular contact ball bearings arranged back-to-back. It requires less axial space therefore it can be used for applications where two single row angular contact ball bearings arranged back-to-back take up too much axial space. It accommodates radial as well as axial loads in either direction.
5300 r/min limiting speed
Accommodates tilting moments
Stiff bearing arrangement
Liens connexes
- SKF 3311 ANR/C3 2 Row Ball Bearing - 55 mm ID, 120 mm OD 49.2 mm Race Width
- SKF 3311 A 2 Row Ball Bearing - 55 mm ID, 120 mm OD 49.2 mm Race Width
- SKF 3311 DMA 2 Row Ball Bearing - 55 mm ID, 120 mm OD 49.2 mm Race Width
- SKF 3311 A/C3 2 Row Ball Bearing - 55 mm ID, 120 mm OD 49.2 mm Race Width
- SKF 3311 ATN9/C3 2 Row Ball Bearing - 55 mm ID, 120 mm OD 49.2 mm Race Width
- SKF 3311 A-2RS1/C3MT33 2 Row Ball Bearing - 55 mm ID, 120 mm OD 49.2 mm Race Width
- SKF 3311 A-2Z/C3MT33 2 Row Ball Bearing - 55 mm ID, 120 mm OD 49.2 mm Race Width
- FAG 3311-BD-XL-TVH 2 Row Angular Contact Ball Bearing - 55 mm ID, 120 mm OD 49.2 mm Race Width
