SKF 1224 KM/C3 120 mm ID 2 Row Ball Bearing -, 215 mm OD
- N° de stock RS:
- 209-1784
- Référence fabricant:
- 1224 KM/C3
- Fabricant:
- SKF
Sous-total (1 unité)*
1 401,41 €
(TVA exclue)
1 695,71 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 01 février 2027
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 1 401,41 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 209-1784
- Référence fabricant:
- 1224 KM/C3
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Ball Bearing | |
| Inside Diameter | 120mm | |
| Outside Diameter | 215mm | |
| Race Width | 42mm | |
| Cage Material | Machined Metal | |
| Ball Material | Steel | |
| End Type | Open | |
| Number of Rows | 2 | |
| Internal Clearance | C3 | |
| Static Load Rating | 53kN | |
| Dynamic Load Rating | 119kN | |
| Standards/Approvals | No | |
| Series | Self-aligning ball bearings | |
| Bore Type | Tapered | |
| Limiting Speed | 4000rpm | |
| Bearing Type | Self-Aligning | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Ball Bearing | ||
Inside Diameter 120mm | ||
Outside Diameter 215mm | ||
Race Width 42mm | ||
Cage Material Machined Metal | ||
Ball Material Steel | ||
End Type Open | ||
Number of Rows 2 | ||
Internal Clearance C3 | ||
Static Load Rating 53kN | ||
Dynamic Load Rating 119kN | ||
Standards/Approvals No | ||
Series Self-aligning ball bearings | ||
Bore Type Tapered | ||
Limiting Speed 4000rpm | ||
Bearing Type Self-Aligning | ||
- Pays d'origine :
- MY
SKF Self Aligning Ball Bearing, 120 mm ID, 215 mm OD - 1224 KM/C3
Got a shaft that's difficult to align with its housing, or that's liable to bend during operation? This ball bearing from SKF is ideal to use in this situation, as it's not affected by the angular misalignment that can be caused by shaft deflection. Because it's self-aligning, it generates a minimal amount of friction during operation and remains cool even at high speeds. A bearing such as this one will give you a long service life in applications with a light axial load.
• Open end type allows for straightforward relubrication
• Tapered bore type enables the transfer of a load evenly while rolling
• Inside diameter of 120 mm and outside diameter of 215 mm, which are displaced relative to each other to accommodate combined loads
Application information
• Rotating machinery, such as stirrers and blenders
• Fans and blowers
• Intermediate shafts in vehicles
How do I mount a self-aligning bearing with a tapered bore?
Screw up the lock nut to the end of the indicated range. Remove the lock nut, then place the washer by securing the nut back on the sleeve. Bend one of the lock washer tabs into a matching slot on the nut.
Liens connexes
- SKF 1224 KM 120 mm ID 2 Row Ball Bearing -, 215 mm OD
- SKF 1224 M 120 mm ID 2 Row Ball Bearing -, 215 mm OD
- SKF 2320 KM/C3 100 mm ID 2 Row Ball Bearing -, 215 mm OD
- SKF 6224/C3 1 Row Ball Bearing - 120 mm ID, 215 mm OD
- SKF N 224 ECM/C3 120 mm ID Roller Bearing, 215 mm OD
- SKF 61834/C3 1 Row Ball Bearing - 170 mm ID, 215 mm OD
- SKF 2320 M/C3 100 mm ID 2 Row Ball Bearing -, 215 mm OD
- SKF 6320/C3 1 Row Ball Bearing - 100 mm ID, 215 mm OD
