SKF 1210 EKTN9/C3 50 mm ID 2 Row Ball Bearing -, 90 mm OD
- N° de stock RS:
- 209-1759
- Référence fabricant:
- 1210 EKTN9/C3
- Fabricant:
- SKF
Sous-total (1 unité)*
61,85 €
(TVA exclue)
74,84 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 10 unité(s) expédiée(s) à partir du 21 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 61,85 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 209-1759
- Référence fabricant:
- 1210 EKTN9/C3
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Inside Diameter | 50mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 90mm | |
| Race Width | 20mm | |
| Ball Material | Steel | |
| Cage Material | Non-Metallic | |
| End Type | Open | |
| Number of Rows | 2 | |
| Static Load Rating | 9.15kN | |
| Internal Clearance | C3 | |
| Dynamic Load Rating | 26.5kN | |
| Standards/Approvals | No | |
| Series | 2 Light | |
| Bore Type | Tapered | |
| Limiting Speed | 10000rpm | |
| Bearing Type | Self-Aligning | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Inside Diameter 50mm | ||
Product Type Ball Bearing | ||
Outside Diameter 90mm | ||
Race Width 20mm | ||
Ball Material Steel | ||
Cage Material Non-Metallic | ||
End Type Open | ||
Number of Rows 2 | ||
Static Load Rating 9.15kN | ||
Internal Clearance C3 | ||
Dynamic Load Rating 26.5kN | ||
Standards/Approvals No | ||
Series 2 Light | ||
Bore Type Tapered | ||
Limiting Speed 10000rpm | ||
Bearing Type Self-Aligning | ||
- Pays d'origine :
- MY
SKF 2 Light Series Ball Bearing, 50mm Inside Diameter, 90mm Outside Diameter - 1210 EKTN9/C3
This ball bearing is a self-aligning rolling element designed for applications requiring radial load accommodation and shaft misalignment compensation. It is configured with two concentric rows of balls and a tapered inner bore to fit onto conical shafts, operating as an open-ended unit suited to installations where axial clearance is acceptable.
Features and Benefits:
• C3 internal clearance allows thermal expansion without increased running friction
• Maximum operating speed 10000r/min supports high-speed rotating equipment
• Non-metallic cage reduces contact wear and lowers noise levels
• Steel balls deliver consistent rolling contact for load transmission
• Dynamic load capacity 26.5kN improves resistance to fluctuating radial forces
• Static load capacity 9.15kN enhances support under stationary loads
• Maximum operating speed 10000r/min supports high-speed rotating equipment
• Non-metallic cage reduces contact wear and lowers noise levels
• Steel balls deliver consistent rolling contact for load transmission
• Dynamic load capacity 26.5kN improves resistance to fluctuating radial forces
• Static load capacity 9.15kN enhances support under stationary loads
Applications
• Suitable for agricultural machinery with slight shaft misalignment
• Used for conveyor rollers requiring high-speed rotation
• Ideal for textile machinery with Compact bearing housings
• Can be used for electric motor assemblies with tapered shafts
• Used for gearboxes where two-row load distribution is needed
• Used for conveyor rollers requiring high-speed rotation
• Ideal for textile machinery with Compact bearing housings
• Can be used for electric motor assemblies with tapered shafts
• Used for gearboxes where two-row load distribution is needed
How does the tapered bore assist with mounting?
The tapered bore permits press-fit on conical adaptors, enabling axial positioning and controlled radial clearance adjustment.
What operating condition is implied by the open end design?
The open end configuration allows easier lubrication access but offers less protection against contamination than sealed types.
How does two-row construction affect load handling?
Dual rows share radial loads across more rolling elements, reducing stress per ball and improving load distribution.
What is the significance of the cage material choice?
A non-metallic cage minimises metal-to-metal contact within the assembly, which can decrease friction and damp vibration.
Liens connexes
- SKF 2210 EKTN9/C3 50 mm ID 2 Row Ball Bearing -, 90 mm OD
- SKF 1210 EKTN9 50 mm ID 2 Row Self-Aligning Ball Bearing -, 90 mm OD
- SKF 1308 EKTN9/C3 40 mm ID 2 Row Ball Bearing -, 90 mm OD
- SKF 2308 EKTN9/C3 40 mm ID 2 Row Ball Bearing -, 90 mm OD
- SKF 1210 ETN9/C3 50 mm ID 2 Row Ball Bearing -, 90 mm OD
- SKF 1310 EKTN9/C3 50 mm ID 2 Row Ball Bearing -, 110 mm OD
- SKF 2210 EKTN9 50 mm ID 2 Row Ball Bearing -, 90 mm OD
- SKF 1206 EKTN9/C3 30 mm ID 2 Row Ball Bearing -, 62 mm OD
