SKF 1205 EKTN9 25 mm ID 2 Row Ball Bearing -, 52 mm OD
- N° de stock RS:
- 209-1747
- Numéro d'article Distrelec:
- 304-22-103
- Référence fabricant:
- 1205 EKTN9
- Fabricant:
- SKF
Sous-total (1 unité)*
34,67 €
(TVA exclue)
41,95 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 2 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 34,67 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 209-1747
- Numéro d'article Distrelec:
- 304-22-103
- Référence fabricant:
- 1205 EKTN9
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Inside Diameter | 25mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 52mm | |
| Race Width | 15mm | |
| Ball Material | Bearing Steel | |
| Cage Material | Non-Metallic | |
| End Type | Open | |
| Number of Rows | 2 | |
| Static Load Rating | 4kN | |
| Internal Clearance | CN | |
| Dynamic Load Rating | 14.3kN | |
| Bore Type | Tapered | |
| Standards/Approvals | No | |
| Series | Self-aligning ball bearings | |
| Limiting Speed | 18000rpm | |
| Bearing Type | Self-Aligning | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Inside Diameter 25mm | ||
Product Type Ball Bearing | ||
Outside Diameter 52mm | ||
Race Width 15mm | ||
Ball Material Bearing Steel | ||
Cage Material Non-Metallic | ||
End Type Open | ||
Number of Rows 2 | ||
Static Load Rating 4kN | ||
Internal Clearance CN | ||
Dynamic Load Rating 14.3kN | ||
Bore Type Tapered | ||
Standards/Approvals No | ||
Series Self-aligning ball bearings | ||
Limiting Speed 18000rpm | ||
Bearing Type Self-Aligning | ||
SKF Self-aligning ball bearings Series Ball Bearing, 25mm Inside Diameter, 52mm Outside Diameter - 1205 EKTN9
This ball bearing is a self-aligning rotary element designed to accommodate shaft misalignment and support radial loads in rotating assemblies. It is intended for integration into mechanical and electromechanical systems where dependable alignment correction and continuous operation at elevated speeds are required.
Features and Benefits:
• Two-row design provides enhanced load distribution and stability
• Non-metallic cage reduces friction and limits local heating
• Bearing steel balls deliver wear resistance under cyclical loads
• CN internal clearance allows controlled axial play for thermal growth
• 18,000 r/min limiting speed supports high-speed rotating applications
• Dynamic load capacity of 14.3 kN improves operational endurance
• Non-metallic cage reduces friction and limits local heating
• Bearing steel balls deliver wear resistance under cyclical loads
• CN internal clearance allows controlled axial play for thermal growth
• 18,000 r/min limiting speed supports high-speed rotating applications
• Dynamic load capacity of 14.3 kN improves operational endurance
Applications
• Suitable for automation drive shafts requiring misalignment tolerance
• Ideal for electrical motors with tapered shaft interfaces
• Used in mechanical gearboxes where high rotational speed is present
• Can be used for servo systems needing Compact multi-row support
• Ideal for electrical motors with tapered shaft interfaces
• Used in mechanical gearboxes where high rotational speed is present
• Can be used for servo systems needing Compact multi-row support
What bore configuration does this component accept?
It is designed with a tapered bore to mount on conical shaft journals using sleeves or adaptor systems.
How does the open end affect maintenance procedures?
An open end permits Visual inspection and easier lubrication access during scheduled service intervals.
What static load conditions can it withstand without permanent deformation?
The bearing has a static capacity of 4 kN, suitable for installations with intermittent high radial loads.
Which dimensional envelope should designers allow for external housing?
The outer diameter measures 52mm with a race width of 15mm, informing housing bore and axial clearance requirements.
Liens connexes
- SKF 1205 EKTN9/C3 25 mm ID 2 Row Ball Bearing -, 52 mm OD
- SKF 2205 EKTN9 25 mm ID 2 Row Ball Bearing -, 52 mm OD
- SKF 2205 EKTN9/C3 25 mm ID 2 Row Ball Bearing -, 52 mm OD
- SKF 1205 ETN9 25 mm ID 2 Row Ball Bearing -, 52 mm OD
- SKF 1205 ETN9/C3 25 mm ID 2 Row Ball Bearing -, 52 mm OD
- SNR 1205 25 mm ID 2 Row Ball Bearing -, 52 mm OD
- NTN 1205S 25 mm ID 2 Row Ball Bearing -, 52 mm OD
- FAG 1205-TVH 25 mm ID 2 Row Ball Bearing -, 52 mm OD