SKF W 61907-2RS1 1 Row Ball Bearing - 35 mm ID, 55 mm OD
- N° de stock RS:
- 208-0470
- Référence fabricant:
- W 61907-2RS1
- Fabricant:
- SKF
Sous-total (1 unité)*
144,06 €
(TVA exclue)
174,31 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 2 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 144,06 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 208-0470
- Référence fabricant:
- W 61907-2RS1
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Inside Diameter | 35mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 55mm | |
| Race Width | 10mm | |
| Race Material | Stainless Steel | |
| Cage Material | Stainless Steel | |
| Ball Material | Stainless Steel | |
| End Type | Sealed | |
| Number of Rows | 1 | |
| Static Load Rating | 7.65kN | |
| Internal Clearance | CN | |
| Dynamic Load Rating | 9.36kN | |
| Bore Type | Cylindrical | |
| Series | W 6009-2RS1 | |
| Standards/Approvals | No | |
| Limiting Speed | 7500rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Inside Diameter 35mm | ||
Product Type Ball Bearing | ||
Outside Diameter 55mm | ||
Race Width 10mm | ||
Race Material Stainless Steel | ||
Cage Material Stainless Steel | ||
Ball Material Stainless Steel | ||
End Type Sealed | ||
Number of Rows 1 | ||
Static Load Rating 7.65kN | ||
Internal Clearance CN | ||
Dynamic Load Rating 9.36kN | ||
Bore Type Cylindrical | ||
Series W 6009-2RS1 | ||
Standards/Approvals No | ||
Limiting Speed 7500rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
SKF W 6009-2RS1 Series Ball Bearing, 35mm Inside Diameter, 55mm Outside Diameter - W 61907-2RS1
This ball bearing is a sealed single-row deep-groove unit designed to support radial and moderate axial loads in rotating assemblies. Manufactured from stainless steel, it provides corrosion-resistant running surfaces and is suited to machinery where exclusion of contamination and material longevity are required.
Features and Benefits:
• Sealed construction limits ingress and reduces maintenance
• Stainless-steel races and balls resist corrosion in humid environments
• Stainless-steel cage supports stable operation at rated speeds
• CN internal clearance accommodates thermal and assembly variation
• Dynamic load capacity 9.36 kN delivers robust load carrying
• Static load capacity 7.65 kN resists deformation under stationary loads
• Stainless-steel races and balls resist corrosion in humid environments
• Stainless-steel cage supports stable operation at rated speeds
• CN internal clearance accommodates thermal and assembly variation
• Dynamic load capacity 9.36 kN delivers robust load carrying
• Static load capacity 7.65 kN resists deformation under stationary loads
Applications
• Suitable for precision automation actuator shafts
• Ideal for electric motor rotor supports in control panels
• Used with conveyor rollers in food-processing lines
• Can be used for gearbox intermediate shafts in machinery
• Suitable for spindle support in electronic-assembly equipment
• Ideal for electric motor rotor supports in control panels
• Used with conveyor rollers in food-processing lines
• Can be used for gearbox intermediate shafts in machinery
• Suitable for spindle support in electronic-assembly equipment
What shaft Interface does it require for fitting?
It fits a cylindrical bore with a 35mm internal diameter and should be mounted on a smooth, properly sized shaft to ensure correct seating and load distribution.
How fast can it operate reliably?
The bearings limiting speed is 7,500 r/min under appropriate lubrication and operating conditions to maintain life and performance.
What construction details aid sealing performance?
The sealed end configuration provides continuous contact barriers on both sides to reduce ingress of particles and retain lubricant within the rolling-element area.
Which components determine its axial and radial stiffness?
Stiffness characteristics are governed by the single-row deep-groove geometry together with the hardened stainless-steel race profiles and the internal clearance class.
Liens connexes
- SKF 61907-2RS1 1 Row Ball Bearing - 35 mm ID, 55 mm OD
- SKF 61907 1 Row Ball Bearing - 35 mm ID, 55 mm OD
- SKF 61907-2RZ 1 Row Ball Bearing - 35 mm ID, 55 mm OD
- FAG 61907 1 Row Ball Bearing - 35 mm ID, 55 mm OD
- FAG 61907-2Z-HLC 1 Row Ball Bearing - 35 mm ID, 55 mm OD
- FAG 61907-2RSR-HLC 1 Row Ball Bearing - 35 mm ID, 55 mm OD
- SKF Ball Bearing 55 mm ID 100 mm OD 1726211-2RS1
- SKF 62311-2RS1 1 Row Ball Bearing - 55 mm ID, 120 mm OD
