SKF 2307 ETN9/C3 35 mm ID 2 Row Ball Bearing -, 80 mm OD
- N° de stock RS:
- 207-9798
- Référence fabricant:
- 2307 ETN9/C3
- Fabricant:
- SKF
Sous-total (1 unité)*
107,07 €
(TVA exclue)
129,55 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 02 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 107,07 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 207-9798
- Référence fabricant:
- 2307 ETN9/C3
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Ball Bearing | |
| Inside Diameter | 35mm | |
| Outside Diameter | 80mm | |
| Race Width | 31mm | |
| Cage Material | Non-Metallic | |
| Ball Material | Steel | |
| End Type | Open | |
| Number of Rows | 2 | |
| Internal Clearance | C3 | |
| Static Load Rating | 11.2kN | |
| Dynamic Load Rating | 39.7kN | |
| Series | Self-aligning ball bearings | |
| Standards/Approvals | No | |
| Bore Type | Cylindrical | |
| Limiting Speed | 12000rpm | |
| Bearing Type | Self-Aligning | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Ball Bearing | ||
Inside Diameter 35mm | ||
Outside Diameter 80mm | ||
Race Width 31mm | ||
Cage Material Non-Metallic | ||
Ball Material Steel | ||
End Type Open | ||
Number of Rows 2 | ||
Internal Clearance C3 | ||
Static Load Rating 11.2kN | ||
Dynamic Load Rating 39.7kN | ||
Series Self-aligning ball bearings | ||
Standards/Approvals No | ||
Bore Type Cylindrical | ||
Limiting Speed 12000rpm | ||
Bearing Type Self-Aligning | ||
- Pays d'origine :
- IT
SKF Self-aligning ball bearings Series Ball Bearing, 35mm Inside Diameter, 80mm Outside Diameter - 2307 ETN9/C3
This ball bearing is a two-row self-aligning unit designed to accommodate shaft misalignment and support radial loads in rotating assemblies. It features steel balls with a cylindrical bore and an open end, intended for applications where angular displacement between shaft and housing can occur while maintaining smooth rotation at elevated speeds.
Features & Benefits
• 39.7 kN dynamic load capacity for sustained radial loading
• 11.2 kN static load rating to resist heavy stationary loads
• Permissible angular misalignment 3° to absorb shaft deviation
• Limiting speed 12,000 r/min for high-speed operation
• Non-metallic cage reduces friction and minimises maintenance
• C3 internal clearance to allow thermal expansion under service
• 11.2 kN static load rating to resist heavy stationary loads
• Permissible angular misalignment 3° to absorb shaft deviation
• Limiting speed 12,000 r/min for high-speed operation
• Non-metallic cage reduces friction and minimises maintenance
• C3 internal clearance to allow thermal expansion under service
**Applications**
• Suitable for conveyor drive systems with shaft deflection
• Ideal for motor and gearbox assemblies in automation
• Used with electrical motors requiring high running speed
• Can be used for rotating equipment in electronics production
• Suitable for bearings in mechanical actuators and linkages
• Ideal for motor and gearbox assemblies in automation
• Used with electrical motors requiring high running speed
• Can be used for rotating equipment in electronics production
• Suitable for bearings in mechanical actuators and linkages
What seating tolerances should I consider for mounting?
Use standard seat tolerances
recommended d1 ≈ 46.7mm and D1 ≈ 67mm Interface dimensions support appropriate fits for normal conditions.
How does mass affect dynamic behaviour in precision systems?
The bearing mass is 0.68kg, which influences rotor balance and inertia during acceleration and deceleration phases.
What are the abutment limits for housings and shafts?
Minimum shaft shoulder diameter da min is 44mm and maximum housing bore Da max is 71mm with fillet allowance ra max 1.5mm.
Which calculation factors assist fatigue and life estimates?
Use factors such as kr 0.05, e 0.46, Y0 1.4, Y1 1.35 and Y2 2.1 when performing bearing life and load distribution calculations.
Liens connexes
- SKF 2307 ETN9 35 mm ID 2 Row Ball Bearing -, 80 mm OD
- SKF 2307 EKTN9/C3 35 mm ID 2 Row Ball Bearing -, 80 mm OD
- SKF 1307 ETN9/C3 35 mm ID 2 Row Ball Bearing -, 80 mm OD
- SKF 2307 E-2RS1TN9/C3 35 mm ID 2 Row Ball Bearing -, 80 mm OD
- SKF NU 2307 ECP/C3 35 mm ID Roller Bearing, 80 mm OD
- SKF NJ 2307 ECP/C3 35 mm ID Cylindrical Roller Bearing, 80 mm OD
- FAG 2307-K-TVH-C3 35 mm ID 2 Row Ball Bearing -, 80 mm OD
- SKF 2202 ETN9/C3 15 mm ID 2 Row Ball Bearing -, 35 mm OD