SKF 61952 MA 1 Row Ball Bearing - 260 mm ID, 360 mm OD
- N° de stock RS:
- 207-7070
- Référence fabricant:
- 61952 MA
- Fabricant:
- SKF
Sous-total (1 unité)*
2 445,83 €
(TVA exclue)
2 959,45 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 09 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 2 445,83 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 207-7070
- Référence fabricant:
- 61952 MA
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Ball Bearing | |
| Inside Diameter | 260mm | |
| Outside Diameter | 360mm | |
| Race Width | 46mm | |
| Cage Material | Machined Metal | |
| Ball Material | Steel | |
| End Type | Open | |
| Number of Rows | 1 | |
| Static Load Rating | 270kN | |
| Internal Clearance | CN | |
| Dynamic Load Rating | 212kN | |
| Standards/Approvals | No | |
| Bore Type | Parallel | |
| Series | 61952 MA | |
| Limiting Speed | 3000rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Ball Bearing | ||
Inside Diameter 260mm | ||
Outside Diameter 360mm | ||
Race Width 46mm | ||
Cage Material Machined Metal | ||
Ball Material Steel | ||
End Type Open | ||
Number of Rows 1 | ||
Static Load Rating 270kN | ||
Internal Clearance CN | ||
Dynamic Load Rating 212kN | ||
Standards/Approvals No | ||
Bore Type Parallel | ||
Series 61952 MA | ||
Limiting Speed 3000rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
- Pays d'origine :
- FR
SKF Deep-Groove Ball Bearing, 260 mm ID, 360 mm OD - 61952 MA
Need to accommodate radial as well as axial loads? This deep-groove ball bearing from SKF handles loads in either direction while running at high speeds. It's an open-type bearing, so you have easy access to the balls for lubrication, and the lubricant can travel freely around the race. Open-end ball bearings of this type are suited for use in clean environments where contamination is unlikely.
• Made from bearing steel with high and uniform hardness, wear-resistance and high elastic limits
• Low friction torque, which lowers the operating temperature to save on wear and make for a quieter and smoother operation
Application Information
• Car motors
• Automation control
• Garden and household tools
• Factory equipment
How are deep-groove ball bearings constructed?
Deep-groove ball bearings consist of an inner ring and an outer ring with balls held in a smooth, low-friction raceway in between.
Is oil or grease best to use in an open-type ball bearing?
Open-type ball bearings should ideally be lubricated with oils, which have lower viscosity than grease for more efficient operation.
Liens connexes
- SKF 23952 CC/W33 Cylindrical 260 mm ID Roller Bearing, 360 mm OD
- SKF 23952 CC/C3W33 Cylindrical 260 mm ID Roller Bearing, 360 mm OD
- SKF 16034 1 Row Ball Bearing - 170 mm ID, 260 mm OD
- SKF 6034 M 1 Row Ball Bearing - 170 mm ID, 260 mm OD
- SKF 61938 MA 1 Row Ball Bearing - 190 mm ID, 260 mm OD
- SKF 6324 1 Row Ball Bearing - 120 mm ID, 260 mm OD
- SKF 16052 MA 1 Row Ball Bearing - 260 mm ID, 400 mm OD
- SKF 6052 M 1 Row Ball Bearing - 260 mm ID, 400 mm OD