SKF 61811-2RS1 1 Row Ball Bearing - 55 mm ID, 72 mm OD
- N° de stock RS:
- 207-6975
- Référence fabricant:
- 61811-2RS1
- Fabricant:
- SKF
Sous-total (1 unité)*
80,07 €
(TVA exclue)
96,88 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 9 unité(s) expédiée(s) à partir du 10 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 80,07 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 207-6975
- Référence fabricant:
- 61811-2RS1
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Ball Bearing | |
| Inside Diameter | 55mm | |
| Outside Diameter | 72mm | |
| Race Width | 9mm | |
| Cage Material | Sheet Metal | |
| Race Material | Steel | |
| Ball Material | Steel | |
| End Type | Sealed | |
| Number of Rows | 1 | |
| Internal Clearance | CN | |
| Static Load Rating | 8.8kN | |
| Dynamic Load Rating | 9.04kN | |
| Standards/Approvals | No | |
| Series | 61811 | |
| Bore Type | Parallel | |
| Limiting Speed | 5300rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| Flange Outside Diameter | 72mm | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Ball Bearing | ||
Inside Diameter 55mm | ||
Outside Diameter 72mm | ||
Race Width 9mm | ||
Cage Material Sheet Metal | ||
Race Material Steel | ||
Ball Material Steel | ||
End Type Sealed | ||
Number of Rows 1 | ||
Internal Clearance CN | ||
Static Load Rating 8.8kN | ||
Dynamic Load Rating 9.04kN | ||
Standards/Approvals No | ||
Series 61811 | ||
Bore Type Parallel | ||
Limiting Speed 5300rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
Flange Outside Diameter 72mm | ||
SKF Ball Bearing, Deep-Groove Bearing Type, 55mm ID, 72mm OD, 9mm Race Width - 61811-2RS1
To balance radial and axial loads in both directions on your machine shaft, roll out this ball bearing from SKF. Its deep-groove design helps to keep friction to a minimum, reducing wear and heat to ensure long-lasting use. As there's a contact seal on each side, the pre-lubricated unit keeps grease in and contaminants out, putting an end to frequent maintenance. A dynamic load rating of 9.04kN and a static load rating of 8.8kN mean it can bear the burden of heavy-duty loads.
• Made of bearing steel for resistance to impact, wear and corrosion
• Inner diameter of 55mm and outer diameter of 72mm to fit larger shafts
• Light weight of 83g to minimise strain on your equipment
Applications
• Windmills
• Automotive engineering
• Agricultural equipment
• Industrial pumps
The SKF deep groove ball bearings are particularly versatile. They are suitable for high and very high speeds, accommodate radial and axial loads in both directions and require little maintenance. Because deep groove ball bearings are the most widely used bearing type, they are available from SKF in many designs, variants and sizes. It has 55 mm ID and 72 mm OD.
How fast does this bearing rotate?
Bearing is of bearing steel
Cylindrical bore type
Thanks to its limiting speed of 5300rpm, you can rest assured that this bearing can rotate quickly without a hitch.
What's the difference between dynamic and static load?
Dynamic load refers to the amount of force the bearing can handle when in motion, while static load refers to the amount of force it supports while stationary.
Liens connexes
- SKF 61811-2RZ 1 Row Ball Bearing - 55 mm ID, 72 mm OD
- SKF 61811 1 Row Deep Groove Ball Bearing - 55 mm ID, 72 mm OD
- FAG 61811-2RZ-Y 1 Row Ball Bearing - 55 mm ID, 72 mm OD
- FAG 61811-2RSR-Y 1 Row Ball Bearing - 55 mm ID, 72 mm OD
- FAG 61811-Y 1 Row Deep Groove Ball Bearing - 55 mm ID, 72 mm OD
- SKF Ball Bearing 55 mm ID 100 mm OD 1726211-2RS1
- SKF 6207-2RS1 1 Row Ball Bearing - 35 mm ID, 72 mm OD
- SKF 61910-2RS1 1 Row Ball Bearing - 50 mm ID, 72 mm OD