SKF 608-2RSL 1 Row Ball Bearing - 8 mm ID, 22 mm OD
- N° de stock RS:
- 207-6948
- Numéro d'article Distrelec:
- 304-09-827
- Référence fabricant:
- 608-2RSL
- Fabricant:
- SKF
Sous-total (1 unité)*
7,67 €
(TVA exclue)
9,28 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 359 unité(s) expédiée(s) à partir du 12 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 7,67 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 207-6948
- Numéro d'article Distrelec:
- 304-09-827
- Référence fabricant:
- 608-2RSL
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Inside Diameter | 8mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 22mm | |
| Race Width | 7mm | |
| Ball Material | Steel | |
| Cage Material | Sheet Metal | |
| End Type | Sealed | |
| Number of Rows | 1 | |
| Internal Clearance | CN | |
| Static Load Rating | 1.37kN | |
| Dynamic Load Rating | 3.45kN | |
| Bore Type | Parallel | |
| Standards/Approvals | No | |
| Series | 608 | |
| Limiting Speed | 38000rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Inside Diameter 8mm | ||
Product Type Ball Bearing | ||
Outside Diameter 22mm | ||
Race Width 7mm | ||
Ball Material Steel | ||
Cage Material Sheet Metal | ||
End Type Sealed | ||
Number of Rows 1 | ||
Internal Clearance CN | ||
Static Load Rating 1.37kN | ||
Dynamic Load Rating 3.45kN | ||
Bore Type Parallel | ||
Standards/Approvals No | ||
Series 608 | ||
Limiting Speed 38000rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
- Pays d'origine :
- IT
SKF Ball Bearing, Deep-Groove Bearing Type, Single Row, 8mm ID, 22mm OD - 608-2RSL
Need a bearing that can handle getting into a spin? Try this single-row deep-groove ball bearing from SKF. With an optimised design, it's able to operate at high rotational speeds and you can use it to support both radial and axial loads in either direction. The unit is ready to go straight to work, as it comes conveniently pre-lubricated with just the right amount of grease. Seals on either end ensure you won't need to mop up leaking lubricant. The seals also make the bearing suitable to use in harsh environments, as they prevent dirt from entering the unit.
Features & Benefits
• Low friction, for reduced power loss and plant efficiency
• Internal geometry reduces heat generation, which increases its service life
• Rolling elements are manufactured to close tolerances, so there's minimal vibration and noise
• Heat treated for reliability, so maintains its dimensional stability in high temperatures
Applications
• Mining and minerals processing
• Boring machines
• Agricultural equipment
• Food and beverage industries
Can I use this ball bearing in humid operating conditions?
Yes, this bearing withstands damp and humid conditions, as it's made from corrosion-resistant stainless steel.
Liens connexes
- SKF 608 1 Row Ball Bearing - 8 mm ID, 22 mm OD
- SKF 608-Z 1 Row Ball Bearing - 8 mm ID, 22 mm OD
- SKF 608/C3 1 Row Ball Bearing - 8 mm ID, 22 mm OD
- SKF 608-2RSH 1 Row Ball Bearing - 8 mm ID, 22 mm OD
- SKF 608-2Z 1 Row Ball Bearing - 8 mm ID, 22 mm OD
- SKF 608-RSH 1 Row Ball Bearing - 8 mm ID, 22 mm OD
- SKF 627-2RSL 1 Row Deep Groove Ball Bearing - 7 mm ID, 22 mm OD
- SKF W 608-2Z 1 Row Ball Bearing - 8 mm ID, 22 mm OD