SKF 6206-2Z/C3WT 1 Row Ball Bearing - 30 mm ID, 62 mm OD
- N° de stock RS:
- 207-6501
- Référence fabricant:
- 6206-2Z/C3WT
- Fabricant:
- SKF
Sous-total (1 unité)*
30,98 €
(TVA exclue)
37,49 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 18 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 30,98 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 207-6501
- Référence fabricant:
- 6206-2Z/C3WT
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Inside Diameter | 30mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 62mm | |
| Race Width | 16mm | |
| Ball Material | Steel | |
| Cage Material | Sheet Metal | |
| End Type | Double Shielded | |
| Number of Rows | 1 | |
| Static Load Rating | 11.2kN | |
| Internal Clearance | C3 | |
| Dynamic Load Rating | 20.3kN | |
| Series | 6206 | |
| Standards/Approvals | No | |
| Bore Type | Cylindrical | |
| Limiting Speed | 12000rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Inside Diameter 30mm | ||
Product Type Ball Bearing | ||
Outside Diameter 62mm | ||
Race Width 16mm | ||
Ball Material Steel | ||
Cage Material Sheet Metal | ||
End Type Double Shielded | ||
Number of Rows 1 | ||
Static Load Rating 11.2kN | ||
Internal Clearance C3 | ||
Dynamic Load Rating 20.3kN | ||
Series 6206 | ||
Standards/Approvals No | ||
Bore Type Cylindrical | ||
Limiting Speed 12000rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
- Pays d'origine :
- IT
SKF 6206 Series Ball Bearing, 30mm Inside Diameter, 62mm Outside Diameter - 6206-2Z/C3WT
This ball bearing is a sealed, single-row deep-groove solution designed for rotary support in automation, electronics and mechanical systems. It combines steel rolling elements with a sheet-metal cage and double shields to provide smooth operation where compact, robust bearing support is required.
Features & Benefits
• Double shields reduce contamination ingress and simplify maintenance
• Internal clearance C3 accommodates thermal expansion at higher speeds
• Limiting speed 12 000 r/min enables high-speed rotational applications
• Dynamic load rating 20.3 kN increases fatigue life under radial load
• Static load rating 11.2 kN resists deformation during idle or shock conditions
• Internal clearance C3 accommodates thermal expansion at higher speeds
• Limiting speed 12 000 r/min enables high-speed rotational applications
• Dynamic load rating 20.3 kN increases fatigue life under radial load
• Static load rating 11.2 kN resists deformation during idle or shock conditions
**Applications**
• Suitable for spindle support in small motor assemblies
• Ideal for bearing housings in conveyor drives
• Used with precision gearboxes in automation equipment
• Can be used for fan and blower shafts in electrical systems
• Ideal for bearing housings in conveyor drives
• Used with precision gearboxes in automation equipment
• Can be used for fan and blower shafts in electrical systems
What seating tolerances are relevant for correct mounting?
Shaft and housing seat dimensions should match standard seat tolerances
minimum shaft shoulder diameter and abutment radii must comply with recommended abutment dimensions to ensure correct axial location.
How does the cage material affect operation in Compact assemblies?
The sheet-metal cage offers a balance of rigidity and low cross-section, allowing tight axial space usage while maintaining ball guidance and load distribution.
What mass should be allowed when calculating rotating inertia?
Use the bearing mass of 0.21kg when estimating inertia for motor and rotor dynamic calculations.
Which reference speed is used for lubrication planning?
Use the reference speed of 24 000 r/min as the baseline for lubrication and temperature-rise considerations when operating near limits.
Liens connexes
- SKF 6206-2RS1/C3WT 1 Row Deep Groove Ball Bearing - 30 mm ID, 62 mm OD
- SKF 6206-2Z/C3GJN 1 Row Ball Bearing - 30 mm ID, 62 mm OD
- SKF 6206-2Z/C3LHT23 1 Row Ball Bearing - 30 mm ID, 62 mm OD
- SKF 6206-2Z/C4 1 Row Ball Bearing - 30 mm ID, 62 mm OD
- SKF 6206-2Z/C3 1 Row Ball Bearing - 30 mm ID, 62 mm OD
- SKF 6206-2Z 1 Row Ball Bearing - 30 mm ID, 62 mm OD
- SKF W 6206-2Z 1 Row Ball Bearing - 30 mm ID, 62 mm OD
- FAG 6206-2Z 1 Row Ball Bearing - 30 mm ID, 62 mm OD