SKF 6003-2RSH/C3GJN 1 Row Deep Groove Ball Bearing - 17 mm ID, 35 mm OD
- N° de stock RS:
- 207-6360
- Référence fabricant:
- 6003-2RSH/C3GJN
- Fabricant:
- SKF
Sous-total (1 unité)*
19,52 €
(TVA exclue)
23,62 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 3 unité(s) expédiée(s) à partir du 13 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 19,52 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 207-6360
- Référence fabricant:
- 6003-2RSH/C3GJN
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Deep Groove Ball Bearing | |
| Inside Diameter | 17mm | |
| Outside Diameter | 35mm | |
| Race Width | 10mm | |
| Ball Material | Steel | |
| Cage Material | Sheet Metal | |
| End Type | Sealed | |
| Number of Rows | 1 | |
| Internal Clearance | C3 | |
| Static Load Rating | 3.25kN | |
| Dynamic Load Rating | 6.37kN | |
| Bore Type | Cylindrical | |
| Series | 6003 | |
| Standards/Approvals | No | |
| Limiting Speed | 13000rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Deep Groove Ball Bearing | ||
Inside Diameter 17mm | ||
Outside Diameter 35mm | ||
Race Width 10mm | ||
Ball Material Steel | ||
Cage Material Sheet Metal | ||
End Type Sealed | ||
Number of Rows 1 | ||
Internal Clearance C3 | ||
Static Load Rating 3.25kN | ||
Dynamic Load Rating 6.37kN | ||
Bore Type Cylindrical | ||
Series 6003 | ||
Standards/Approvals No | ||
Limiting Speed 13000rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
- Pays d'origine :
- IT
SKF 6003 Series Deep Groove Ball Bearing, 17mm Inside Diameter, 35mm Outside Diameter - 6003-2RSH/C3GJN
This deep groove ball bearing is designed to support radial and moderate axial loads in rotating assemblies common to automation and mechanical systems. It features a sealed end arrangement and a cylindrical bore, making it suitable for equipment requiring protection from contaminants while maintaining smooth rotation at elevated speeds.
Features and Benefits:
• Sealed ends limit contamination ingress and reduce maintenance
• Cylindrical bore simplifies shaft fitting and alignment
• Single-row configuration offers straightforward load handling
• Sheet metal cage reduces mass while maintaining ball spacing
• C3 internal clearance accommodates thermal expansion
• High limiting speed enhances performance in fast-rotating systems
• Cylindrical bore simplifies shaft fitting and alignment
• Single-row configuration offers straightforward load handling
• Sheet metal cage reduces mass while maintaining ball spacing
• C3 internal clearance accommodates thermal expansion
• High limiting speed enhances performance in fast-rotating systems
Applications
• Suitable for high-speed electric motor spindles in automation
• Ideal for precision fans and blowers in electronics cooling
• Used with rotary encoders and small gearbox inputs
• Can be used for pump shafts in Compact fluid systems
• Suitable for conveyor rollers in light-duty material handling
• Ideal for precision fans and blowers in electronics cooling
• Used with rotary encoders and small gearbox inputs
• Can be used for pump shafts in Compact fluid systems
• Suitable for conveyor rollers in light-duty material handling
What material composes the rolling elements and how does that affect wear?
The balls are MADE from steel which provides good hardness and wear resistance for industrial duty cycles.
How does the internal clearance influence installation tolerances?
The increased C3 clearance allows for shaft expansion and can tolerate greater interference fits without inducing excessive preload.
What limits the maximum safe rotational speed?
The limiting speed specification defines the rotational threshold
operation below that Value helps prevent heat build-up and bearing degradation.
How do the dynamic and static load capacities relate to selection?
The dynamic capacity indicates continuous load support during rotation whereas the static rating relates to load resistance when stationary
both inform suitable load margins for application design.
Liens connexes
- Beco 6003-BHTS330 Deep Groove Ball Bearing - 17 mm ID, 35 mm OD
- Beco 6003-ZZBHTS280 Deep Groove Ball Bearing - 17 mm ID, 35 mm OD
- FAG 6003-C3 1 Row Deep Groove Ball Bearing - 17 mm ID, 35 mm OD
- SKF 6003-2RSH 1 Row Ball Bearing - 17 mm ID, 35 mm OD
- SKF 6204-2RSH/C3GJN 1 Row Deep Groove Ball Bearing - 20 mm ID, 47 mm OD
- SKF 6205-2RSH/C3GJN 1 Row Deep Groove Ball Bearing - 25 mm ID, 52 mm OD
- SKF 6004-2RSH/C3GJN 1 Row Deep Groove Ball Bearing - 20 mm ID, 42 mm OD
- SKF 6003-2RSL/C3 1 Row Deep Groove Ball Bearing - 17 mm ID, 35 mm OD