SKF 7012 CDGA/P4A 1 Row Angular Contact Ball Bearing - 60 mm ID, 95 mm OD 18 mm Race Width
- N° de stock RS:
- 207-5428
- Référence fabricant:
- 7012 CDGA/P4A
- Fabricant:
- SKF
Sous-total (1 unité)*
480,18 €
(TVA exclue)
581,02 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 2 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 480,18 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 207-5428
- Référence fabricant:
- 7012 CDGA/P4A
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Angular Contact Ball Bearing | |
| Inside Diameter | 60mm | |
| Outside Diameter | 95mm | |
| Race Width | 18mm | |
| Ball Material | Steel | |
| End Type | Open | |
| Number of Rows | 1 | |
| Static Load Rating | 34.5kN | |
| Contact Angle | 15° | |
| Internal Clearance | CN | |
| Dynamic Load Rating | 40.3kN | |
| Standards/Approvals | No | |
| Bore Type | Parallel | |
| Series | 7012 | |
| Limiting Speed | 22000rpm | |
| Bearing Type | Single Row Angular Contact Ball | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Angular Contact Ball Bearing | ||
Inside Diameter 60mm | ||
Outside Diameter 95mm | ||
Race Width 18mm | ||
Ball Material Steel | ||
End Type Open | ||
Number of Rows 1 | ||
Static Load Rating 34.5kN | ||
Contact Angle 15° | ||
Internal Clearance CN | ||
Dynamic Load Rating 40.3kN | ||
Standards/Approvals No | ||
Bore Type Parallel | ||
Series 7012 | ||
Limiting Speed 22000rpm | ||
Bearing Type Single Row Angular Contact Ball | ||
- Pays d'origine :
- IT
SKF 7012 Series Angular Contact Ball Bearing, 60mm Bore Diameter, 95mm Outside Diameter - 7012 CDGA/P4A
This angular contact ball bearing provides axial and radial load handling for precision rotating assemblies in automation and electromechanical systems. Designed as a single-row unit with an open-end configuration, it suits applications requiring accurate rotational alignment and consistent contact geometry at moderate contact angles. The product is intended for use where compact, high-speed performance and defined internal clearance are required.
Features and Benefits:
• 15° contact angle for combined axial and radial load support
• Steel balls for Durable rolling contact and wear resistance
• Limiting speed 22,000 r/min for high-speed operational demands
• Internal clearance CN to maintain predictable preload and stiffness
• Dynamic load capacity 40.3 kN for sustained operational loads
• Static load capacity 34.5 kN to withstand stationary loads
• Steel balls for Durable rolling contact and wear resistance
• Limiting speed 22,000 r/min for high-speed operational demands
• Internal clearance CN to maintain predictable preload and stiffness
• Dynamic load capacity 40.3 kN for sustained operational loads
• Static load capacity 34.5 kN to withstand stationary loads
Applications
• Suitable for high-speed spindle systems in automation equipment
• Ideal for precision motor shafts in electrical drives
• Used with servo gearboxes requiring axial load accommodation
• Can be used for rotary encoders and indexing mechanisms
• Used for Compact gearboxes in robotics and motion control
• Ideal for precision motor shafts in electrical drives
• Used with servo gearboxes requiring axial load accommodation
• Can be used for rotary encoders and indexing mechanisms
• Used for Compact gearboxes in robotics and motion control
What shaft Interface does it require for installation?
The bore is manufactured with a parallel internal profile for slip-fit mounting onto cylindrical shafts.
How does the open-end design affect maintenance?
With exposed rings and rolling elements, Visual inspection and lubrication access are simplified compared with sealed variants.
What element material is used for rolling contact?
The bearing utilises steel balls to provide consistent contact behaviour and long service under dynamic cycling.
How many rows of rolling elements are provided?
The bearing is configured as a single row to allow axial load transmission in one direction while retaining compactness.
Liens connexes
- SKF 7012 CD/P4A 1 Row Ball Bearing - 60 mm ID, 95 mm OD 18 mm Race Width
- SKF 7012 CDGB/P4A 1 Row Ball Bearing - 60 mm ID, 95 mm OD 18 mm Race Width
- SKF 7012 ACDGA/P4A 1 Row Ball Bearing - 60 mm ID, 95 mm OD 18 mm Race Width
- SKF 7012 ACD/P4A 1 Row Ball Bearing - 60 mm ID, 95 mm OD 18 mm Race Width
- SKF 7206 CDGA/P4A 1 Row Angular Contact Ball Bearing - 30 mm ID, 62 mm OD 16 mm Race Width
- SKF 7007 CDGA/P4A 1 Row Ball Bearing - 35 mm ID, 62 mm OD 14 mm Race Width
- SKF 7011 CDGA/P4A 1 Row Ball Bearing - 55 mm ID, 90 mm OD 18 mm Race Width
- SKF 7000 CDGA/P4A 1 Row Ball Bearing - 10 mm ID, 26 mm OD 8 mm Race Width