SKF 6415/C3 1 Row Ball Bearing - 75 mm ID, 190 mm OD
- N° de stock RS:
- 207-5418
- Référence fabricant:
- 6415/C3
- Fabricant:
- SKF
Sous-total (1 unité)*
731,56 €
(TVA exclue)
885,19 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 14 décembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 731,56 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 207-5418
- Référence fabricant:
- 6415/C3
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Ball Bearing | |
| Inside Diameter | 75mm | |
| Outside Diameter | 190mm | |
| Race Width | 45mm | |
| Cage Material | Sheet Metal | |
| Ball Material | Steel | |
| End Type | Open | |
| Number of Rows | 1 | |
| Internal Clearance | C3 | |
| Static Load Rating | 114kN | |
| Dynamic Load Rating | 153kN | |
| Standards/Approvals | No | |
| Bore Type | Parallel | |
| Series | 6415 | |
| Limiting Speed | 5000rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Ball Bearing | ||
Inside Diameter 75mm | ||
Outside Diameter 190mm | ||
Race Width 45mm | ||
Cage Material Sheet Metal | ||
Ball Material Steel | ||
End Type Open | ||
Number of Rows 1 | ||
Internal Clearance C3 | ||
Static Load Rating 114kN | ||
Dynamic Load Rating 153kN | ||
Standards/Approvals No | ||
Bore Type Parallel | ||
Series 6415 | ||
Limiting Speed 5000rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
- Pays d'origine :
- FR
SKF Deep-Groove Ball Bearing, 75 mm ID, 190 mm OD - 6415/C3
This versatile deep-groove ball bearing from SKF is suitable for use at high speeds and can accommodate radial and axial loads in both directions. It calls for little in the way of maintenance and will offer you a long and hassle-free service life. It's an open-end bearing, so it allows the lubricant to travel freely, and it's simple to re-lubricate. The bearing has an inside diameter of 75 mm and an outside diameter of 190 mm, with a race width of 45 mm. It can bear a mass of up to 5.81 kg.
• Creates less friction torque, lowering the operating temperature and reducing energy costs
• Offers quiet operation
• Steel material for durability and a long service life
Application Information
• Gearboxes
• Factory equipment
• Electric motors
Why are deep-groove ball bearings so widely used?
Deep-groove ball bearings have their balls set in a smooth raceway between inner and outer rings. They're the most popular type of ball bearing because they can handle high speeds as well as both radial and axial loads.
Liens connexes
- SKF 6415 1 Row Ball Bearing - 75 mm ID, 190 mm OD
- SKF 6415/C4 1 Row Ball Bearing - 75 mm ID, 190 mm OD
- FAG 6415-M-C3 1 Row Deep Groove Ball Bearing - 75 mm ID, 190 mm OD
- FAG 6415-M 1 Row Deep Groove Ball Bearing - 75 mm ID, 190 mm OD
- SKF 61838 MA/C3 1 Row Ball Bearing - 190 mm ID, 240 mm OD
- SKF 6238 M/C3 1 Row Ball Bearing - 190 mm ID, 340 mm OD
- SKF 6038 M/C3 1 Row Ball Bearing - 190 mm ID, 290 mm OD
- SKF 61830 MA/C3 1 Row Ball Bearing - 150 mm ID, 190 mm OD