INA 6208-C 1 Row Ball Bearing - 40 mm ID, 80 mm OD
- N° de stock RS:
- 191-3846
- Référence fabricant:
- 6208-C
- Fabricant:
- INA
Sous-total (1 unité)*
16,43 €
(TVA exclue)
19,88 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 05 mai 2027
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 16,43 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 191-3846
- Référence fabricant:
- 6208-C
- Fabricant:
- INA
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | INA | |
| Product Type | Ball Bearing | |
| Inside Diameter | 40mm | |
| Outside Diameter | 80mm | |
| Race Width | 18mm | |
| Ball Material | Steel | |
| Cage Material | Steel | |
| End Type | Open | |
| Number of Rows | 1 | |
| Static Load Rating | 17.8kN | |
| Internal Clearance | CN | |
| Dynamic Load Rating | 31.5kN | |
| Bore Type | Parallel | |
| Standards/Approvals | No | |
| Series | 2 Light | |
| Bearing Type | Single Row Deep Groove Ball | |
| Race Type | Plain | |
| Sélectionner tout | ||
|---|---|---|
Marque INA | ||
Product Type Ball Bearing | ||
Inside Diameter 40mm | ||
Outside Diameter 80mm | ||
Race Width 18mm | ||
Ball Material Steel | ||
Cage Material Steel | ||
End Type Open | ||
Number of Rows 1 | ||
Static Load Rating 17.8kN | ||
Internal Clearance CN | ||
Dynamic Load Rating 31.5kN | ||
Bore Type Parallel | ||
Standards/Approvals No | ||
Series 2 Light | ||
Bearing Type Single Row Deep Groove Ball | ||
Race Type Plain | ||
High and very high speeds are required
The bearing arrangement must be operated with very low friction
Very low running noise is required, without reducing the speed, load carrying capacity and operating life of the bearing (Generation C)
High demands are made on the sealing of the bearing, without increasing heat generation or limiting the speed (Generation C)
The bearing position is to be designed particularly economically
Double row bearings can be considered for bearing arrangements where:
The load carrying capacity of single row deep groove ball bearings is no longer sufficient
Axial loads in both directions and/or tilting moments must be supported in addition to radial loads
A high load carrying capacity is required and the design envelope available in a radial and axial direction is relatively small
Liens connexes
- SNR 6208 1 Row Ball Bearing - 40 mm ID, 80 mm OD
- SNR 6208EE 1 Row Ball Bearing - 40 mm ID, 80 mm OD
- SKF 6208 1 Row Ball Bearing - 40 mm ID, 80 mm OD
- NSK 6208 1 Row Ball Bearing - 40 mm ID, 80 mm OD
- FAG 6208-C4 1 Row Ball Bearing - 40 mm ID, 80 mm OD
- SKF 6208-2Z 1 Row Ball Bearing - 40 mm ID, 80 mm OD
- SKF 6208-2ZNR 1 Row Ball Bearing - 40 mm ID, 80 mm OD
- SKF 6208/C4 1 Row Ball Bearing - 40 mm ID, 80 mm OD
