INA 6207-C 1 Row Ball Bearing - 35 mm ID, 72 mm OD
- N° de stock RS:
- 191-3845
- Référence fabricant:
- 6207-C
- Fabricant:
- INA
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
12,59 €
(TVA exclue)
15,23 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 23 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 12,59 € |
| 5 - 9 | 12,10 € |
| 10 - 24 | 11,83 € |
| 25 + | 11,57 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 191-3845
- Référence fabricant:
- 6207-C
- Fabricant:
- INA
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | INA | |
| Product Type | Ball Bearing | |
| Inside Diameter | 35mm | |
| Outside Diameter | 72mm | |
| Race Width | 17mm | |
| Ball Material | Steel | |
| Cage Material | Steel | |
| End Type | Open | |
| Number of Rows | 1 | |
| Internal Clearance | CN | |
| Static Load Rating | 15.4kN | |
| Dynamic Load Rating | 28kN | |
| Bore Type | Parallel | |
| Series | 2 Light | |
| Standards/Approvals | No | |
| Bearing Type | Single Row Deep Groove Ball | |
| Race Type | Plain | |
| Sélectionner tout | ||
|---|---|---|
Marque INA | ||
Product Type Ball Bearing | ||
Inside Diameter 35mm | ||
Outside Diameter 72mm | ||
Race Width 17mm | ||
Ball Material Steel | ||
Cage Material Steel | ||
End Type Open | ||
Number of Rows 1 | ||
Internal Clearance CN | ||
Static Load Rating 15.4kN | ||
Dynamic Load Rating 28kN | ||
Bore Type Parallel | ||
Series 2 Light | ||
Standards/Approvals No | ||
Bearing Type Single Row Deep Groove Ball | ||
Race Type Plain | ||
High and very high speeds are required
The bearing arrangement must be operated with very low friction
Very low running noise is required, without reducing the speed, load carrying capacity and operating life of the bearing (Generation C)
High demands are made on the sealing of the bearing, without increasing heat generation or limiting the speed (Generation C)
The bearing position is to be designed particularly economically
Double row bearings can be considered for bearing arrangements where:
The load carrying capacity of single row deep groove ball bearings is no longer sufficient
Axial loads in both directions and/or tilting moments must be supported in addition to radial loads
A high load carrying capacity is required and the design envelope available in a radial and axial direction is relatively small
Liens connexes
- INA 6207-C-C3 1 Row Ball Bearing - 35 mm ID, 72 mm OD
- SNR 6207EE Ball Bearing - 35 mm ID, 72 mm OD
- NSK 6207 1 Row Ball Bearing - 35 mm ID, 72 mm OD
- SKF 6207 1 Row Ball Bearing - 35 mm ID, 72 mm OD
- SNR 6207 1 Row Ball Bearing - 35 mm ID, 72 mm OD
- SKF 6207-2RS1K 1 Row Ball Bearing - 35 mm ID, 72 mm OD
- SKF 6207-RS1 1 Row Ball Bearing - 35 mm ID, 72 mm OD
- SKF 6207-Z 1 Row Ball Bearing - 35 mm ID, 72 mm OD