INA 6202-C 1 Row Ball Bearing - 15 mm ID, 35 mm OD
- N° de stock RS:
- 191-3834
- Référence fabricant:
- 6202-C
- Fabricant:
- INA
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
4,58 €
(TVA exclue)
5,54 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 8 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 4,58 € |
| 5 - 9 | 4,37 € |
| 10 - 24 | 4,30 € |
| 25 + | 4,22 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 191-3834
- Référence fabricant:
- 6202-C
- Fabricant:
- INA
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | INA | |
| Inside Diameter | 15mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 35mm | |
| Race Width | 11mm | |
| Ball Material | Steel | |
| Cage Material | Steel | |
| End Type | Open | |
| Number of Rows | 1 | |
| Static Load Rating | 3.75kN | |
| Internal Clearance | CN | |
| Dynamic Load Rating | 8.4kN | |
| Series | 6202 | |
| Standards/Approvals | No | |
| Bore Type | Parallel | |
| Limiting Speed | 33000rpm | |
| Race Type | Plain | |
| Bearing Type | Single Row Deep Groove Ball | |
| Sélectionner tout | ||
|---|---|---|
Marque INA | ||
Inside Diameter 15mm | ||
Product Type Ball Bearing | ||
Outside Diameter 35mm | ||
Race Width 11mm | ||
Ball Material Steel | ||
Cage Material Steel | ||
End Type Open | ||
Number of Rows 1 | ||
Static Load Rating 3.75kN | ||
Internal Clearance CN | ||
Dynamic Load Rating 8.4kN | ||
Series 6202 | ||
Standards/Approvals No | ||
Bore Type Parallel | ||
Limiting Speed 33000rpm | ||
Race Type Plain | ||
Bearing Type Single Row Deep Groove Ball | ||
High and very high speeds are required
The bearing arrangement must be operated with very low friction
Very low running noise is required, without reducing the speed, load carrying capacity and operating life of the bearing (Generation C)
High demands are made on the sealing of the bearing, without increasing heat generation or limiting the speed (Generation C)
The bearing position is to be designed particularly economically
Double row bearings can be considered for bearing arrangements where:
The load carrying capacity of single row deep groove ball bearings is no longer sufficient
Axial loads in both directions and/or tilting moments must be supported in addition to radial loads
A high load carrying capacity is required and the design envelope available in a radial and axial direction is relatively small
Liens connexes
- INA 6202-C-C3 1 Row Ball Bearing - 15 mm ID, 35 mm OD
- SNR 6202EE Ball Bearing - 15 mm ID, 35 mm OD
- NSK 6202 1 Row Ball Bearing - 15 mm ID, 35 mm OD
- SKF 6202 1 Row Ball Bearing - 15 mm ID, 35 mm OD
- SKF 6202-ZTN9 1 Row Ball Bearing - 15 mm ID, 35 mm OD
- SKF 6202-2RSH 1 Row Ball Bearing - 15 mm ID, 35 mm OD
- Beco 6202-ZZBHTS280 Deep Groove Ball Bearing - 15 mm ID, 35 mm OD
- SKF 6202-2Z 1 Row Ball Bearing - 15 mm ID, 35 mm OD