FAG 61800-2RSR-HLC 1 Row Ball Bearing - 10 mm ID, 19 mm OD
- N° de stock RS:
- 190-8404
- Référence fabricant:
- 61800-2RSR-HLC
- Fabricant:
- FAG
Offre groupée disponible
Sous-total (1 unité)*
16,67 €
(TVA exclue)
20,17 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité |
|---|---|
| 1 - 4 | 16,67 € |
| 5 - 9 | 16,00 € |
| 10 - 24 | 15,68 € |
| 25 + | 15,31 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 190-8404
- Référence fabricant:
- 61800-2RSR-HLC
- Fabricant:
- FAG
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | FAG | |
| Inside Diameter | 10 mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 19 mm | |
| Race Width | 5mm | |
| Ball Material | Steel | |
| Cage Material | Steel | |
| End Type | Sealed | |
| Number of Rows | 1 | |
| Internal Clearance | CN | |
| Static Load Rating | 840N | |
| Dynamic Load Rating | 1.82kN | |
| Standards/Approvals | No | |
| Series | 1 Extra Light Thrust | |
| Bore Type | Parallel | |
| Limiting Speed | 21000rpm | |
| Race Type | Plain | |
| Bearing Type | Single Row Deep Groove Ball | |
| Sélectionner tout | ||
|---|---|---|
Marque FAG | ||
Inside Diameter 10 mm | ||
Product Type Ball Bearing | ||
Outside Diameter 19 mm | ||
Race Width 5mm | ||
Ball Material Steel | ||
Cage Material Steel | ||
End Type Sealed | ||
Number of Rows 1 | ||
Internal Clearance CN | ||
Static Load Rating 840N | ||
Dynamic Load Rating 1.82kN | ||
Standards/Approvals No | ||
Series 1 Extra Light Thrust | ||
Bore Type Parallel | ||
Limiting Speed 21000rpm | ||
Race Type Plain | ||
Bearing Type Single Row Deep Groove Ball | ||
High and very high speeds are required
The bearing arrangement must be operated with very low friction
Very low running noise is required, without reducing the speed, load carrying capacity and operating life of the bearing (Generation C)
High demands are made on the sealing of the bearing, without increasing heat generation or limiting the speed (Generation C)
The bearing position is to be designed particularly economically
Double row bearings can be considered for bearing arrangements where:
The load carrying capacity of single row deep groove ball bearings is no longer sufficient
Axial loads in both directions and/or tilting moments must be supported in addition to radial loads
A high load carrying capacity is required and the design envelope available in a radial and axial direction is relatively small
Liens connexes
- FAG 61800-HLC 1 Row Ball Bearing - 10 mm ID, 19 mm OD
- FAG 61800-2Z-HLC 1 Row Ball Bearing - 10 mm ID, 19 mm OD
- FAG 698-2RSR-HLC 1 Row Deep Groove Ball Bearing - 8 mm ID, 19 mm OD
- FAG 61802-2RSR-HLC 1 Row Ball Bearing - 15 mm ID, 24 mm OD
- FAG S6004-2RSR-HLC 1 Row Ball Bearing - 20 mm ID, 42 mm OD
- FAG S6000-2RSR-HLC 1 Row Ball Bearing - 10 mm ID, 26 mm OD
- FAG 61900-2RSR-HLC 1 Row Ball Bearing - 10 mm ID, 22 mm OD
- FAG S6304-2RSR-HLC 1 Row Ball Bearing - 20 mm ID, 52 mm OD