FAG 16002-A 1 Row Ball Bearing - 15 mm ID, 32 mm OD
- N° de stock RS:
- 190-8322
- Référence fabricant:
- 16002-A
- Fabricant:
- FAG
Offre groupée disponible
Sous-total (1 unité)*
11,96 €
(TVA exclue)
14,47 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 80,00 €
En stock
- 8 unité(s) prête(s) à être expédiée(s)
- Plus 10 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 11,96 € |
| 5 - 9 | 11,48 € |
| 10 - 24 | 11,23 € |
| 25 + | 10,98 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 190-8322
- Référence fabricant:
- 16002-A
- Fabricant:
- FAG
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | FAG | |
| Product Type | Ball Bearing | |
| Inside Diameter | 15 mm | |
| Outside Diameter | 32 mm | |
| Race Width | 8mm | |
| Cage Material | Steel | |
| Ball Material | Steel | |
| End Type | Open | |
| Number of Rows | 1 | |
| Internal Clearance | CN | |
| Static Load Rating | 2.85kN | |
| Dynamic Load Rating | 5.9kN | |
| Standards/Approvals | No | |
| Series | 0 Extra Light | |
| Bore Type | Parallel | |
| Limiting Speed | 33500rpm | |
| Race Type | Plain | |
| Bearing Type | Single Row Deep Groove Ball | |
| Sélectionner tout | ||
|---|---|---|
Marque FAG | ||
Product Type Ball Bearing | ||
Inside Diameter 15 mm | ||
Outside Diameter 32 mm | ||
Race Width 8mm | ||
Cage Material Steel | ||
Ball Material Steel | ||
End Type Open | ||
Number of Rows 1 | ||
Internal Clearance CN | ||
Static Load Rating 2.85kN | ||
Dynamic Load Rating 5.9kN | ||
Standards/Approvals No | ||
Series 0 Extra Light | ||
Bore Type Parallel | ||
Limiting Speed 33500rpm | ||
Race Type Plain | ||
Bearing Type Single Row Deep Groove Ball | ||
High and very high speeds are required
The bearing arrangement must be operated with very low friction
Very low running noise is required, without reducing the speed, load carrying capacity and operating life of the bearing (Generation C)
High demands are made on the sealing of the bearing, without increasing heat generation or limiting the speed (Generation C)
The bearing position is to be designed particularly economically
Double row bearings can be considered for bearing arrangements where:
The load carrying capacity of single row deep groove ball bearings is no longer sufficient
Axial loads in both directions and/or tilting moments must be supported in addition to radial loads
A high load carrying capacity is required and the design envelope available in a radial and axial direction is relatively small
Liens connexes
- FAG 16002-A-2Z 1 Row Ball Bearing - 15 mm ID, 32 mm OD
- FAG 16002-A-C3 1 Row Deep Groove Ball Bearing - 15 mm ID, 32 mm OD
- SKF 16002 1 Row Ball Bearing - 15 mm ID, 32 mm OD
- SKF 16002-2Z 1 Row Ball Bearing - 15 mm ID, 32 mm OD
- SKF 16002/C3 1 Row Deep Groove Ball Bearing - 15 mm ID, 32 mm OD
- FAG 6002-C 1 Row Ball Bearing - 15 mm ID, 32 mm OD
- FAG 6002-C-C3 1 Row Ball Bearing - 15 mm ID, 32 mm OD
- FAG 6002-C-2Z 1 Row Ball Bearing - 15 mm ID, 32 mm OD