FAG 6202-C-2HRS-C3 1 Row Deep Groove Ball Bearing - 15 mm ID, 35 mm OD
- N° de stock RS:
- 137-1646
- Référence fabricant:
- 6202-C-2HRS-C3
- Fabricant:
- FAG
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
6,06 €
(TVA exclue)
7,33 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 66 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 6,06 € |
| 5 - 9 | 5,81 € |
| 10 - 24 | 5,69 € |
| 25 + | 5,58 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 137-1646
- Référence fabricant:
- 6202-C-2HRS-C3
- Fabricant:
- FAG
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | FAG | |
| Product Type | Deep Groove Ball Bearing | |
| Inside Diameter | 15mm | |
| Outside Diameter | 35mm | |
| Race Width | 11mm | |
| Ball Material | Steel | |
| Cage Material | Steel | |
| End Type | Sealed | |
| Number of Rows | 1 | |
| Internal Clearance | C3 | |
| Static Load Rating | 3.75kN | |
| Dynamic Load Rating | 8.4kN | |
| Standards/Approvals | No | |
| Series | 2 Light | |
| Bore Type | Parallel | |
| Limiting Speed | 19400rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| Race Type | Plain | |
| Sélectionner tout | ||
|---|---|---|
Marque FAG | ||
Product Type Deep Groove Ball Bearing | ||
Inside Diameter 15mm | ||
Outside Diameter 35mm | ||
Race Width 11mm | ||
Ball Material Steel | ||
Cage Material Steel | ||
End Type Sealed | ||
Number of Rows 1 | ||
Internal Clearance C3 | ||
Static Load Rating 3.75kN | ||
Dynamic Load Rating 8.4kN | ||
Standards/Approvals No | ||
Series 2 Light | ||
Bore Type Parallel | ||
Limiting Speed 19400rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
Race Type Plain | ||
Schaeffler 2 Light Series Deep Groove Ball Bearing, 15mm Inside Diameter, 35mm Outside Diameter - 6202-C-2HRS-C3
This deep groove ball bearing is ideal for diverse industrial applications requiring high reliability. With an inside diameter of 15mm and an outside diameter of 35mm, this bearing offers efficient performance in managing radial loads. Designed with seals on both sides, it provides enhanced protection against contaminants for lasting functionality.
Features & Benefits
• Single row design supports high load capacity
• Sealed on both sides to prevent contamination
• C3 bearing clearance allows for greater internal fit
• Steel construction ensures durability and longevity
• Low noise ball bearing grease for smooth operation
• Dimensional stabilisation up to 120°C enhances performance
Applications
• Commonly used in motor
• Used for precise alignment in assemblies
• Effective in various electronic equipment installations
• Effective in providing motion in conveyor systems
What load ratings can be expected for this bearing?
The basic dynamic load rating reaches 8,900N, while the static load rating allows up to 3,750N, making it suitable for high-load applications in varying conditions.
How does the sealing affect maintenance needs?
The contact seal on both sides enables lifetime lubrication, reducing maintenance frequency and enhancing reliability in operation.
What is the maximum recommended speed for optimal performance?
The limiting speed is approximately 19,400rev/min, which should be adhered to for optimal performance and component longevity.
Liens connexes
- FAG 6308-C-2HRS-C3 1 Row Deep Groove Ball Bearing - 40 mm ID, 90 mm OD
- FAG 6001-C-2HRS-C3 1 Row Deep Groove Ball Bearing - 12 mm ID, 28 mm OD
- FAG 6309-C-2HRS-C3 1 Row Deep Groove Ball Bearing - 45 mm ID, 100 mm OD
- FAG 6206-C-2HRS-C3 1 Row Deep Groove Ball Bearing - 30 mm ID, 62 mm OD
- SKF 6202-Z/C3 1 Row Deep Groove Ball Bearing - 15 mm ID, 35 mm OD
- SKF 6202-2RSL/C3 1 Row Deep Groove Ball Bearing - 15 mm ID, 35 mm OD
- FAG 6202-C-2HRS 1 Row Ball Bearing - 15 mm ID, 35 mm OD
- FAG 6207-C-2HRS-C4 1 Row Deep Groove Ball Bearing - 35 mm ID, 72 mm OD