FAG 6003-2Z-C3 1 Row Ball Bearing - 17 mm ID, 35 mm OD
- N° de stock RS:
- 137-1595
- Référence fabricant:
- 6003-2Z-C3
- Fabricant:
- FAG
Offre groupée disponible
Sous-total (1 unité)*
5,90 €
(TVA exclue)
7,14 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité |
|---|---|
| 1 - 4 | 5,90 € |
| 5 - 9 | 5,68 € |
| 10 - 24 | 5,53 € |
| 25 + | 5,45 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 137-1595
- Référence fabricant:
- 6003-2Z-C3
- Fabricant:
- FAG
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | FAG | |
| Inside Diameter | 17mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 35mm | |
| Race Width | 10mm | |
| Cage Material | Steel | |
| Ball Material | Steel | |
| End Type | Double Shielded | |
| Number of Rows | 1 | |
| Static Load Rating | 3.25kN | |
| Internal Clearance | C3 | |
| Dynamic Load Rating | 6.4kN | |
| Standards/Approvals | No | |
| Series | 0 Extra Light | |
| Bore Type | Parallel | |
| Limiting Speed | 26000rpm | |
| Race Type | Plain | |
| Bearing Type | Single Row Deep Groove Ball | |
| Sélectionner tout | ||
|---|---|---|
Marque FAG | ||
Inside Diameter 17mm | ||
Product Type Ball Bearing | ||
Outside Diameter 35mm | ||
Race Width 10mm | ||
Cage Material Steel | ||
Ball Material Steel | ||
End Type Double Shielded | ||
Number of Rows 1 | ||
Static Load Rating 3.25kN | ||
Internal Clearance C3 | ||
Dynamic Load Rating 6.4kN | ||
Standards/Approvals No | ||
Series 0 Extra Light | ||
Bore Type Parallel | ||
Limiting Speed 26000rpm | ||
Race Type Plain | ||
Bearing Type Single Row Deep Groove Ball | ||
Deep Groove Ball Bearings
FAG from Schaeffler deep groove ball bearings are versatile, self-retaining bearings with solid outer rings, inner rings and ball and cage assemblies. These products are of simple design, durable in operation and easy to maintain. They are available in single and double row designs and in open and sealed variants. Due to the production technology used, open bearings can still have turned recesses on the outer ring for seals or shields.
Features and Benefits
• Low noise levels;• Improved sealing;• Lower friction;• Cost-effective
Product Application Information
Open bearings are suitable for high speeds. Due to the manufacturing process, they have turned recesses for sealing washers and sealing shields.
Suffixes
2Z - Gap seals on both sides. These bearings are greased using a high-quality grease, lubricated for life and suitable for high speeds;2HRS - Lip seals on both sides made from nitrile butadiene rubber. These bearings have an improved sealing function and retention in the outer ring. They are greased using a high-quality grease, lubricated for life and suitable for moderate speeds;2BRS - Non-contact seals on both sides. Their friction level is as low as with the gap seals. In addition, they offer better protection against the ingress of dust and the escape of lubricant;2RSR - Lip seals on both sides made from nitrile butadiene rubber NBR and are suitable for moderate speeds;C - Modified internal construction in Generation C
FAG
Liens connexes
- FAG 6003-2Z-L207-C3 1 Row Deep Groove Ball Bearing - 17 mm ID, 35 mm OD
- FAG 6003-2Z 1 Row Ball Bearing - 17 mm ID, 35 mm OD
- SKF 6003-2Z/C3 1 Row Ball Bearing - 17 mm ID, 35 mm OD
- FAG 6003-2RSR-C3 1 Row Ball Bearing - 17 mm ID, 35 mm OD
- RS PRO 6003-2Z/C3 1 Row Ball Bearing - 17 mm ID, 35 mm OD
- FAG 6003-C3 1 Row Deep Groove Ball Bearing - 17 mm ID, 35 mm OD
- FAG 6003 1 Row Ball Bearing - 17 mm ID, 35 mm OD
- SKF 6003-2Z 1 Row Ball Bearing - 17 mm ID, 35 mm OD