FAG 3204-BD-XL-2HRS-TVH 2 Row Ball Bearing - 20 mm ID, 47 mm OD 20.6 mm Race Width

This ball bearing is a double row angular contact type, suitable for various industrial applications. Featuring an inside diameter of 20mm and an outside diameter of 47mm, it is designed for effective load management. With a race width of 20.6mm, this bearing is constructed from high-quality steel, ensuring durability and reliability in demanding environments.

• Features a double row design for enhanced load capacity

• Used in automation systems to ensure precision movement

The dual row design significantly increases load-carrying capacity, allowing for greater stability under heavy loads. This also results in prolonged operational life due to better distribution of forces across the bearing elements.

The seals on both sides effectively protect against dust and loss of lubricants, thus minimising maintenance requirements. This enhances the overall durability and operational reliability of the bearing in challenging environments.

It features steel as the primary material, which is known for its strength and durability. The cage is made of plastic, which aids in reducing friction and wear during operation.

The CN clearance code indicates a normal operating clearance, making it suitable for applications with standard thermal and load changes. This ensures optimal performance without significant risk of excessive wear or failure.

With a static load rating of 12.9 kN and a dynamic load rating of 20.6 kN, this bearing is well-suited for applications requiring consistent high loads without compromising on reliability.

FAG from Schaeffler double row angular contact ball bearings are units with solid inner and outer rings and ball and cage assemblies with polyamide, sheet steel or brass cages. They correspond in design to single row angular contact ball bearings in pairs in an O arrangement but give a narrower design. They differ in the size of their contact angle and the design of the bearing rings.;The bearings are available in open and sealed versions. Due to the production technology used, open bearings can still have turned recesses on the outer ring for seals or shields. Sealed bearings are maintenance free and, as a result, allow economical bearing arrangements. The self-alignment capacity of angular contact ball bearings is small.

• Lower operating costs;• Reduced maintenance due to improved lubrication;• Lower heat generation;• Less noise

These bearings have improved running accuracy and optimised surfaces giving them an increase in fatigue limit load. In terms of the expanded adjusted rating life, values up to 50% are achieved. In certain applications, a smaller bearing arrangement can be designed.

BD - Modified internal construction;2HRS - Lip seals on both sides;TVH - Solid polyamide snap cage, ball-guided