FAG 6308-2RSR 1 Row Ball Bearing - 40 mm ID, 90 mm OD
- N° de stock RS:
- 137-1447
- Référence fabricant:
- 6308-2RSR
- Fabricant:
- FAG
Bénéficiez d'une remise sur les achats en gros
Ajoutez 5 de plus pour économiser 4%
Consulter les options de prix de grosSous-total (1 unité)*
33,23 €
(TVA exclue)
40,21 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 04 janvier 2027
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | Économie |
|---|---|---|
| 1 - 4 | 33,23 € | - |
| 5 - 9 | 31,88 € | 4% |
| 10 - 24 | 31,21 € | 6% |
| 25 + | 30,58 € | 7% |
*Prix donné à titre indicatif
- N° de stock RS:
- 137-1447
- Référence fabricant:
- 6308-2RSR
- Fabricant:
- FAG
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | FAG | |
| Inside Diameter | 40mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 90mm | |
| Race Width | 23mm | |
| Cage Material | Steel | |
| Ball Material | Steel | |
| End Type | Sealed | |
| Number of Rows | 1 | |
| Internal Clearance | CN | |
| Static Load Rating | 25kN | |
| Dynamic Load Rating | 45.5kN | |
| Series | 63 | |
| Standards/Approvals | No | |
| Bore Type | Parallel | |
| Limiting Speed | 4800rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| Race Type | Plain | |
| Sélectionner tout | ||
|---|---|---|
Marque FAG | ||
Inside Diameter 40mm | ||
Product Type Ball Bearing | ||
Outside Diameter 90mm | ||
Race Width 23mm | ||
Cage Material Steel | ||
Ball Material Steel | ||
End Type Sealed | ||
Number of Rows 1 | ||
Internal Clearance CN | ||
Static Load Rating 25kN | ||
Dynamic Load Rating 45.5kN | ||
Series 63 | ||
Standards/Approvals No | ||
Bore Type Parallel | ||
Limiting Speed 4800rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
Race Type Plain | ||
Schaeffler Series 63 Ball Bearing, 40mm Inside Diameter, 90mm Outside Diameter - 6308-2RSR
This ball bearing provides rotational support for shafts in industrial assemblies, designed for sealed operation in machinery where protection from contaminants is required. It suits environments that demand steady radial load transmission and consistent rotational behaviour at moderate speeds, particularly within automation, electronics, electrical and mechanical systems.
Features & Benefits
• Steel raceways and balls deliver high static load capacity
• Steel cage reduces internal friction for smoother motion
• Sealed construction limits ingress for extended service life
• 45.5 kN dynamic load rating supports heavy radial forces
• 4,800 r/min limiting speed accommodates moderate-speed applications
• Steel cage reduces internal friction for smoother motion
• Sealed construction limits ingress for extended service life
• 45.5 kN dynamic load rating supports heavy radial forces
• 4,800 r/min limiting speed accommodates moderate-speed applications
**Applications**
• Suitable for conveyor drive shafts in factory automation
• Ideal for motor assemblies in electrical equipment
• Used for gearbox input shafts in mechanical drives
• Can be used for spindle supports in electronic manufacturing
• Ideal for motor assemblies in electrical equipment
• Used for gearbox input shafts in mechanical drives
• Can be used for spindle supports in electronic manufacturing
What bore configuration does it use for shaft mounting?
The component has a parallel bore designed for a slip-fit installation onto cylindrical shafts.
How wide is the ring section that bears axial and radial loads?
The outer ring race has a width of 23mm to provide a stable contact surface for load distribution.
What are the outer and inner diameter dimensions for integration planning?
The internal diameter is 40mm and the external diameter is 90mm, enabling selection of compatible housings and seals.
What construction detail reduces maintenance frequency in dusty environments?
End sealing prevents particle ingress, decreasing lubricant contamination and lowering maintenance intervals.
Liens connexes
- FAG 6308-2RSR-C3 1 Row Ball Bearing - 40 mm ID, 90 mm OD
- FAG 6308-N 1 Row Ball Bearing - 40 mm ID, 90 mm OD
- FAG 6308-C-2HRS 1 Row Ball Bearing - 40 mm ID, 90 mm OD
- FAG 6308-C-2Z 1 Row Ball Bearing - 40 mm ID, 90 mm OD
- FAG 6308-C3 1 Row Ball Bearing - 40 mm ID, 90 mm OD
- FAG 6308-2Z 1 Row Ball Bearing - 40 mm ID, 90 mm OD
- FAG 6308-C 1 Row Deep Groove Ball Bearing - 40 mm ID, 90 mm OD
- FAG 6308-2Z-C3 1 Row Ball Bearing - 40 mm ID, 90 mm OD
