SKF 53215 1 Row Thrust Ball Bearing - 75 mm ID, 110 mm OD
- N° de stock RS:
- 587-522
- Référence fabricant:
- 53215
- Fabricant:
- SKF
Sous-total (1 paquet de 5 unités)*
1 104,49 €
(TVA exclue)
1 336,43 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 23 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Paquet(s) | le paquet | Prix par unité* |
|---|---|---|
| 1 + | 1 104,49 € | 220,898 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 587-522
- Référence fabricant:
- 53215
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Inside Diameter | 75mm | |
| Product Type | Thrust Ball Bearing | |
| Outside Diameter | 110mm | |
| Race Width | 28.3mm | |
| Cage Material | Sheet Metal | |
| Number of Rows | 1 | |
| Static Load Rating | 170kN | |
| Dynamic Load Rating | 63.7kN | |
| Bore Type | Ground | |
| Standards/Approvals | RoHS, UNSPSC, eClass | |
| Limiting Speed | 3400rpm | |
| Bearing Type | Thrust Ball | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Inside Diameter 75mm | ||
Product Type Thrust Ball Bearing | ||
Outside Diameter 110mm | ||
Race Width 28.3mm | ||
Cage Material Sheet Metal | ||
Number of Rows 1 | ||
Static Load Rating 170kN | ||
Dynamic Load Rating 63.7kN | ||
Bore Type Ground | ||
Standards/Approvals RoHS, UNSPSC, eClass | ||
Limiting Speed 3400rpm | ||
Bearing Type Thrust Ball | ||
The SKF Single direction thrust ball bearings, with sphered housing washer, can accommodate axial loads in one direction. They must not be subjected to any radial load. Many of the components are interchangeable. The shaft washers have a ground bore that enables an interference fit. The sphered housing washers can accommodate initial misalignment when configured correctly with a sphered seat washer or a machine component with a sphered surface.
Separable design facilitates mounting and dismounting and maintenance inspections
Interchangeable components
Ground bore of shaft washers enables interference fit
Sphered housing washers can accommodate initial misalignment
Liens connexes
- SKF 51117 1 Row Thrust Ball Bearing - 85 mm ID, 110 mm OD
- SKF 51122 1 Row Thrust Ball Bearing - 110 mm ID, 145 mm OD
- SKF 51410 1 Row Thrust Ball Bearing - 50 mm ID, 110 mm OD
- SKF 51312 1 Row Thrust Ball Bearing - 60 mm ID, 110 mm OD
- SKF 81215 TN 75 mm ID Ball Bearing, 110 mm OD
- SKF 51215 1 Row Ball Bearing - 75 mm ID, 110 mm OD
- NTN 81215T2 75 mm ID Needle Roller Thrust Bearing Thrust Cylindrical Roller, 110 mm OD
- NTN 51222 1 Row Thrust Ball Bearing - 110 mm ID, 160 mm OD