SKF W 638/8-2Z 1 Row Ball Bearing - 8 mm ID, 16 mm OD
- N° de stock RS:
- 463-469
- Référence fabricant:
- W 638/8-2Z
- Fabricant:
- SKF
Sous-total (1 unité)*
27,10 €
(TVA exclue)
32,79 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 20 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 27,10 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 463-469
- Référence fabricant:
- W 638/8-2Z
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Ball Bearing | |
| Inside Diameter | 8mm | |
| Outside Diameter | 16mm | |
| Race Width | 6mm | |
| Ball Material | Stainless Steel | |
| Cage Material | Stainless Steel | |
| End Type | Shielded | |
| Number of Rows | 1 | |
| Internal Clearance | CN | |
| Static Load Rating | 0.3kN | |
| Dynamic Load Rating | 0.715kN | |
| Series | W 638/8 | |
| Standards/Approvals | No | |
| Bore Type | Cylindrical | |
| Limiting Speed | 45000rpm | |
| Bearing Type | Stainless Steel Deep Groove Ball Bearing with Integral Sealing | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Ball Bearing | ||
Inside Diameter 8mm | ||
Outside Diameter 16mm | ||
Race Width 6mm | ||
Ball Material Stainless Steel | ||
Cage Material Stainless Steel | ||
End Type Shielded | ||
Number of Rows 1 | ||
Internal Clearance CN | ||
Static Load Rating 0.3kN | ||
Dynamic Load Rating 0.715kN | ||
Series W 638/8 | ||
Standards/Approvals No | ||
Bore Type Cylindrical | ||
Limiting Speed 45000rpm | ||
Bearing Type Stainless Steel Deep Groove Ball Bearing with Integral Sealing | ||
- Pays d'origine :
- JP
SKF W 638/8 Series Ball Bearing, 8mm Inside Diameter, 16mm Outside Diameter - W 638/8-2Z
This ball bearing is a single-row sealed radial bearing designed to provide low-friction rotation for Compact assemblies in automation, electronics and mechanical systems. It combines corrosion-resistant construction with an integral sealing arrangement to support continuous rotational applications where space is limited and component durability is required.
Features & Benefits
• Stainless-steel raceways and balls deliver corrosion resistance and longevity
• Integral shields reduce contamination ingress for extended service life
• Limiting speed 45,000 rpm supports high-speed rotating components
• Dynamic load capacity 0.715 kN allows sustained operational loading
• Static load capacity 0.3 kN resists brinelling under installed loads
• Integral shields reduce contamination ingress for extended service life
• Limiting speed 45,000 rpm supports high-speed rotating components
• Dynamic load capacity 0.715 kN allows sustained operational loading
• Static load capacity 0.3 kN resists brinelling under installed loads
**Applications**
• Suitable for miniature motors in industrial automation
• Ideal for precision fans in electronic enclosures
• Used with rotary encoders and position sensors
• Can be used for small gearbox shafts in electrical drives
• Suitable for spindle assemblies in laboratory equipment
• Ideal for precision fans in electronic enclosures
• Used with rotary encoders and position sensors
• Can be used for small gearbox shafts in electrical drives
• Suitable for spindle assemblies in laboratory equipment
What bore Interface does it use for mounting on shafts?
It has a cylindrical inner bore requiring interference or location methods such as a snug fit with shaft shoulders or securing rings for axial positioning.
How is the bearing retained axially in Compact assemblies?
Axial retention is typically achieved by shoulders, circlips or end caps that bear against the outer ring faces while allowing free rotation.
How does the shielded end type influence lubrication needs?
Integral shields moderate lubricant egress and contaminant ingress, reducing maintenance frequency but still requiring appropriate grease selection for sustained high-speed service.
Liens connexes
- SKF 638/8-2Z 1 Row Ball Bearing - 8 mm ID, 16 mm OD
- SKF W 638/8 R-2Z 1 Row Ball Bearing - 8 mm ID, 16 mm OD
- SKF 638/4-2Z 1 Row Ball Bearing - 4 mm ID, 9 mm OD
- SKF 638/5-2Z 1 Row Ball Bearing - 5 mm ID, 11 mm OD
- SKF W 638/4-2Z 1 Row Ball Bearing - 4 mm ID, 9 mm OD
- SKF W 638/5-2Z 1 Row Ball Bearing - 5 mm ID, 11 mm OD
- SKF W 638/2-2Z 1 Row Deep Groove Ball Bearing - 2 mm ID, 5 mm OD
- SKF W 638/3-2Z 1 Row Deep Groove Ball Bearing - 3 mm ID, 7 mm OD
