SKF 6309-2RS1TN9/HC5C3WT 1 Row Ball Bearing - 45 mm ID, 100 mm OD
- N° de stock RS:
- 460-688
- Référence fabricant:
- 6309-2RS1TN9/HC5C3WT
- Fabricant:
- SKF
Sous-total (1 unité)*
891,04 €
(TVA exclue)
1 078,16 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 21 décembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 891,04 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 460-688
- Référence fabricant:
- 6309-2RS1TN9/HC5C3WT
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Ball Bearing | |
| Inside Diameter | 45mm | |
| Outside Diameter | 100mm | |
| Race Width | 25mm | |
| Cage Material | Non-Metallic | |
| Ball Material | Ceramic | |
| End Type | Sealed | |
| Number of Rows | 1 | |
| Static Load Rating | 31.5kN | |
| Internal Clearance | 36 μm | |
| Dynamic Load Rating | 52.7kN | |
| Standards/Approvals | No | |
| Series | 6309 | |
| Bore Type | Cylindrical | |
| Limiting Speed | 4500rpm | |
| Bearing Type | Deep Groove Ball | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Ball Bearing | ||
Inside Diameter 45mm | ||
Outside Diameter 100mm | ||
Race Width 25mm | ||
Cage Material Non-Metallic | ||
Ball Material Ceramic | ||
End Type Sealed | ||
Number of Rows 1 | ||
Static Load Rating 31.5kN | ||
Internal Clearance 36 μm | ||
Dynamic Load Rating 52.7kN | ||
Standards/Approvals No | ||
Series 6309 | ||
Bore Type Cylindrical | ||
Limiting Speed 4500rpm | ||
Bearing Type Deep Groove Ball | ||
Gavin
The SKF Hybrid ceramic single row deep groove ball bearings with low-friction seals on both sides have rings made of bearing steel and rolling elements made of bearing grade silicon nitride, which make the bearings electrically insulating. The low-friction seals provide better sealing effectiveness than shields and non-contact seals, thus providing significantly prolonged bearing service life, yet they can still operate at the same speeds as shields.
Protected against electric current damage
Especially suited for use in difficult conditions and contaminated environments
Typical benefits of single row deep groove ball bearings
Liens connexes
- SKF 6309 1 Row Ball Bearing - 45 mm ID, 100 mm OD
- SKF 6309 M/C3 1 Row Ball Bearing - 45 mm ID, 100 mm OD
- SKF 6309-Z 1 Row Ball Bearing - 45 mm ID, 100 mm OD
- SKF 6309/C3 1 Row Ball Bearing - 45 mm ID, 100 mm OD
- SKF 6309-2RS1 1 Row Ball Bearing - 45 mm ID, 100 mm OD
- SKF 6309-2Z/VA208 1 Row Ball Bearing - 45 mm ID, 100 mm OD
- SKF 6309-2RS1/C3 1 Row Ball Bearing - 45 mm ID, 100 mm OD
- SKF 6309-2Z/C3WT 1 Row Ball Bearing - 45 mm ID, 100 mm OD
