FAG 635 1 Row Ball Bearing - 5 mm ID, 19 mm OD
- N° de stock RS:
- 312-652
- Référence fabricant:
- 635
- Fabricant:
- FAG
Sous-total (10 unités, dans un pack de 10)*
47,35 €
(TVA exclue)
57,29 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 1 unité(s) expédiée(s) à partir du 28 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Paquet(s) | le paquet | Prix par unité* |
|---|---|---|
| 1 + | 47,35 € | 4,735 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 312-652
- Référence fabricant:
- 635
- Fabricant:
- FAG
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | FAG | |
| Inside Diameter | 5mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 19mm | |
| Race Width | 6mm | |
| Ball Material | Steel | |
| Cage Material | Steel Sheet Metal | |
| Number of Rows | 1 | |
| Internal Clearance | CN | |
| Static Load Rating | 1060N | |
| Dynamic Load Rating | 2800N | |
| Series | 635 | |
| Standards/Approvals | RoHS | |
| Bore Type | Cylindrical | |
| Limiting Speed | 53000rpm | |
| Bearing Type | Deep Groove | |
| Sélectionner tout | ||
|---|---|---|
Marque FAG | ||
Inside Diameter 5mm | ||
Product Type Ball Bearing | ||
Outside Diameter 19mm | ||
Race Width 6mm | ||
Ball Material Steel | ||
Cage Material Steel Sheet Metal | ||
Number of Rows 1 | ||
Internal Clearance CN | ||
Static Load Rating 1060N | ||
Dynamic Load Rating 2800N | ||
Series 635 | ||
Standards/Approvals RoHS | ||
Bore Type Cylindrical | ||
Limiting Speed 53000rpm | ||
Bearing Type Deep Groove | ||
- Pays d'origine :
- TH
FAG 635 Series Ball Bearing, 5mm Inside Diameter, 19mm Outside Diameter - 635
This ball bearing is a Compact deep-groove unit designed to support radial loads and enable smooth rotation in precision assemblies. It is intended for applications where a small-diameter bearing is needed to sustain moderate static and dynamic forces while operating at high rotational speeds.
Features and Benefits:
• Steel raceways with sheet-metal cage increase wear resistance • Cylindrical bore allows straightforward shaft fitting • CN internal clearance helps accommodate thermal expansion • Dynamic capacity 2800N supports sustained operational loads • Static capacity 1060N resists deformation under stationary loads • Rated limiting speed 53000rpm enables high-speed operation
Applications
• Suitable for miniature motor shafts in automation equipment • Ideal for precision fans and cooling systems in electronics • Used with rotary encoders and instrumentation drives • Can be used for light-duty gearbox idler shafts • Suitable for low-mass spindles in electrical assemblies
What material choices affect durability in this bearing?
Bearing balls and raceways are steel, and the cage is formed from steel sheet metal, which together provide a robust contact Interface and predictable wear characteristics.
How does the bore form influence installation?
The cylindrical bore design provides a plain shaft fit that simplifies press-fit or slip-on mounting without specialised adaptors.
What is the bearing configuration in terms of rows?
It is a single-row design, which keeps axial space requirements low and simplifies axial load response.
Are there standards affecting environmental acceptability?
The component meets RoHS requirements, indicating it conforms to restrictions on certain hazardous substances.
Liens connexes
- SKF 635-2Z 1 Row Ball Bearing - 5 mm ID, 19 mm OD
- SKF W 635-2Z 1 Row Ball Bearing - 5 mm ID, 19 mm OD
- Igus BB-635-B180-30-ES 1 Row Ball Bearing - 5 mm ID, 19 mm OD
- Igus BB-635-B180-30-GL 1 Row Ball Bearing - 5 mm ID, 19 mm OD
- FAG 607-2RS 1 Row Ball Bearing - 7 mm ID, 19 mm OD
- FAG 61800-HLC 1 Row Ball Bearing - 10 mm ID, 19 mm OD
- FAG 126-TVH 6 mm ID 2 Row Ball Bearing -, 19 mm OD
- FAG 607-2Z-HLN 1 Row Ball Bearing - 7 mm ID, 19 mm OD