RS PRO Axial Fan, 5 V dc, DC Operation, 6.8m³/h, 400mW, 80mA Max, IP55, 30 x 30 x 10mm
- N° de stock RS:
- 144-2032
- Fabricant:
- RS PRO
Offre groupée disponible
Sous-total (1 unité)*
20,19 €
(TVA exclue)
24,43 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 18 unité(s) prête(s) à être expédiée(s)
- Plus 237 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 44 unité(s) expédiée(s) à partir du 24 novembre 2025
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 20,19 € |
| 5 - 9 | 18,58 € |
| 10 - 24 | 17,78 € |
| 25 - 49 | 16,56 € |
| 50 + | 15,41 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 144-2032
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Supply Voltage | 5 V dc | |
| AC or DC Operation | DC | |
| Height | 30mm | |
| Power Consumption | 400mW | |
| Width | 30mm | |
| Maximum Current | 80mA | |
| Depth | 10.2mm | |
| Termination Type | Lead Wire | |
| Air Flow | 6.8m³/h | |
| Dimensions | 30 x 30 x 10mm | |
| Noise Level | 30dB | |
| Fan Speed | 9000rpm | |
| Sensor Type | Tachometer | |
| Direction of Curve | Forward | |
| Bearing Type | Ball | |
| IP Rating | IP55 | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Supply Voltage 5 V dc | ||
AC or DC Operation DC | ||
Height 30mm | ||
Power Consumption 400mW | ||
Width 30mm | ||
Maximum Current 80mA | ||
Depth 10.2mm | ||
Termination Type Lead Wire | ||
Air Flow 6.8m³/h | ||
Dimensions 30 x 30 x 10mm | ||
Noise Level 30dB | ||
Fan Speed 9000rpm | ||
Sensor Type Tachometer | ||
Direction of Curve Forward | ||
Bearing Type Ball | ||
IP Rating IP55 | ||
- Pays d'origine :
- CN
RS PRO DC Axial Fans
Brought to you by RS Pro, these axial fans are a perfect choice for cooling applications. With a fully integrated electronic commutation, this axial fan provides a durable and smooth airflow to the device it is cooling. Establishing the relevant axial fan needed, the RS Pro series of DC Brushless fans are designed to be up there with the best. All models are highly reliable and excellent quality.
Features and Benefits:
• PBT Thermoplastic casing
• Square orientation
• Can be mounted in a horizontal and vertical position
• Low noise levels
• Smooth and efficient air flow
How noisy are these fans?
Due to the low decibel levels these Axial Fans produce, they are non-intrusive in quitter environments. As an example, a whisper would register as 30 dB, the highest decibel level of this entire RS Pro range would register at 51 dB, the lowest being 18. Meaning these can be classed as whisper quiet.
What are axial fans?
Axial fans are a type of fan used within everyday applications, such as air conditioners and computers. They cause both air and gas (depending on the application) to flow directly through it in an axial direction. Allowing the air/gas flow to be axial and both entry and exit. You would find RS Pro axial fans used in everyday devices, such as fridges, engines and PCs.
Do these fans use ball bearings or sleeve bearings?
These axial fans use ball bearings. Ball bearings are usually the most common choice within axial fans. this is mainly due to their reputation of an excellent service life, ball bearing fans are known to run at full speed with no interruptions for many years. If your axial fan needs to be mounted in a position where the blades are facing in an awkward direction, ball bearing internals mean the fan can be mounted in any axial position.
Applications:
• Ceiling fan/ventilation
• Desktop computers
• Motor engines (radiator in a car)
• Generators
• Air compressors
Broad AC fan selection, short lead times, competitive pricing.
Features and Benefits:
• PBT Thermoplastic casing
• Square orientation
• Can be mounted in a horizontal and vertical position
• Low noise levels
• Smooth and efficient air flow
How noisy are these fans?
Due to the low decibel levels these Axial Fans produce, they are non-intrusive in quitter environments. As an example, a whisper would register as 30 dB, the highest decibel level of this entire RS Pro range would register at 51 dB, the lowest being 18. Meaning these can be classed as whisper quiet.
What are axial fans?
Axial fans are a type of fan used within everyday applications, such as air conditioners and computers. They cause both air and gas (depending on the application) to flow directly through it in an axial direction. Allowing the air/gas flow to be axial and both entry and exit. You would find RS Pro axial fans used in everyday devices, such as fridges, engines and PCs.
Do these fans use ball bearings or sleeve bearings?
These axial fans use ball bearings. Ball bearings are usually the most common choice within axial fans. this is mainly due to their reputation of an excellent service life, ball bearing fans are known to run at full speed with no interruptions for many years. If your axial fan needs to be mounted in a position where the blades are facing in an awkward direction, ball bearing internals mean the fan can be mounted in any axial position.
Applications:
• Ceiling fan/ventilation
• Desktop computers
• Motor engines (radiator in a car)
• Generators
• Air compressors
Broad AC fan selection, short lead times, competitive pricing.
Liens connexes
- RS PRO Axial Fan DC Operation 400mW IP55, 30 x 30 x 10mm
- RS PRO Axial Fan DC Operation 840mW IP55, 30 x 30 x 10mm
- Nidec Components Axial Fan DC Operation 80mA Max
- Sunon Axial Fan dc Operation 400mW 20 x 20 x 10mm
- ebm-papst 250 Series Axial Fan DC Operation 400mW IP20, 25 x 25 x 8mm
- Sepa Axial Fan dc Operation 120mA Max, 30 x 30 x 10mm
- RS PRO Axial Fan DC Operation 1.8W 30 x 30 x 10mm
- ebm-papst 250 Series Axial Fan DC Operation 400mW, 25 x 25 x 8mm