ABB Auxiliary Contact, 1 Contact, 1 NO/1 NC, E299-11, DIN Rail, 5 A, 250V, 2CCA704340R0001
- N° de stock RS:
- 287-6386
- Numéro d'article Distrelec:
- 304-34-290
- Référence fabricant:
- 2CCA704340R0001
- Fabricant:
- ABB
Visuel non contractuel
Sous-total (1 paquet de 10 unités)*
331,42 €
(TVA exclue)
401,02 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 09 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 10 + | 33,142 € | 331,42 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 287-6386
- Numéro d'article Distrelec:
- 304-34-290
- Référence fabricant:
- 2CCA704340R0001
- Fabricant:
- ABB
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ABB | |
| Number of Contacts | 1 | |
| Product Type | Auxiliary Contact | |
| Normal State Configuration | 1 NO/1 NC | |
| Series | E299-11 | |
| Contact Current | 5A | |
| Mount Type | DIN Rail | |
| Contact Voltage | 250V | |
| Minimum Load | 10mA | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 55°C | |
| Standards/Approvals | IEC/EN 60669-2-2, IEC/EN 60669-1 | |
| Sélectionner tout | ||
|---|---|---|
Marque ABB | ||
Number of Contacts 1 | ||
Product Type Auxiliary Contact | ||
Normal State Configuration 1 NO/1 NC | ||
Series E299-11 | ||
Contact Current 5A | ||
Mount Type DIN Rail | ||
Contact Voltage 250V | ||
Minimum Load 10mA | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 55°C | ||
Standards/Approvals IEC/EN 60669-2-2, IEC/EN 60669-1 | ||
- Pays d'origine :
- CN
ABB E299-11 Series Auxiliary Contact, 5A Contact Current, 250V Contact Voltage - 2CCA704340R0001
This auxiliary contact is an add-on switching device designed to signal the operating status of a primary module in installation relays and impulse switches. It snaps onto the main unit to provide a separate changeover output for monitoring or interlocking tasks, and it is intended for DIN-rail mounting in electrical distribution and control panels.
Features & Benefits
• 1NO+1NC contact arrangement supports status signalling needs
• Rated for 5 A at 250V enables moderate control currents
• Minimum switching capacity 10 mA allows detection of low currents
• Operates across -25°C to +55°C for varied ambient conditions
• Conforms to IEC/EN 60669-1 and IEC/EN 60669-2-2 for lighting control compatibility
• Tightening torque 1.2–1.5 N·m for secure Terminal connections
• Rated for 5 A at 250V enables moderate control currents
• Minimum switching capacity 10 mA allows detection of low currents
• Operates across -25°C to +55°C for varied ambient conditions
• Conforms to IEC/EN 60669-1 and IEC/EN 60669-2-2 for lighting control compatibility
• Tightening torque 1.2–1.5 N·m for secure Terminal connections
**Applications**
• Suitable for auxiliary signalling in installation relays and impulse switches
• Ideal for monitoring contact position in lighting control circuits
• Used with DIN-rail mounted automation modules in distribution panels
• Can be used for interlock feedback in building electrical systems
• Ideal for monitoring contact position in lighting control circuits
• Used with DIN-rail mounted automation modules in distribution panels
• Can be used for interlock feedback in building electrical systems
How is the device mounted in control enclosures?
It is designed for Snap-on installation onto standard DIN rails for Compact panel integration.
What switching behaviour supports low-power detection tasks?
The contact set can reliably switch currents down to 10 mA, enabling detection of small control signals.
What standards govern its use in lighting applications?
It meets the requirements specified in IEC/EN 60669-1 and IEC/EN 60669-2-2 applicable to lighting control auxiliary switches.
What mechanical specification ensures firm electrical connections?
Terminal screws require a tightening torque between 1.2–1.5 N·m to maintain contact integrity.
Liens connexes
- ABB Auxiliary Contact 1 NO/1 NC DIN Rail 250V, 2CCA704340R0001
- Schneider Electric Auxiliary Contact 1 NO/1 NC 250V, LUA1C11TQ
- Siemens Auxiliary Contact 1 NO/1 NC 5 A 5TT4900
- WEG Auxiliary Contact Block 1 NO/1 NC DIN Rail 2.5 A ACBF-11
- Legrand Auxiliary Contact 1 NO/1 NC 250V ac, 0 227 04
- Schneider Electric Auxiliary Contact 1 NO/1 NC Side 250V, GAC0521
- ABB Auxiliary Contact Block 1 NO/1 NC Front 1SFN010720R1011 CAL18-11
- Legrand Auxiliary Contact NO/NC 5 A 412431