Schneider Electric Auxiliary Contact, 1 Contact, 1 NO/1 NC, ComPacT NSXm, Clip-on, 5 A, 110 V dc, 690V ac, LV426950

This auxiliary contact provides electrical status signalling for circuit breakers and contactors within industrial electrical systems. It is a clip-on, spring-terminal device offering one normally open and one normally closed contact to monitor open/close and relay trip conditions in low- and medium-voltage assemblies.

• 5A operational current for direct control of signal circuits
• 690V rated contact voltage for high-voltage signalling applications
• Minimum load 2mA enables reliable detection of very low currents
• Spring Terminal with 8mm stripping length for quick wiring
• Clip-on mounting for Rapid attachment to compatible breakers
• 1P configuration supplying both NO and NC status outputs

• Suitable for breaker status monitoring in distribution panels
• used with PowerPact and ComPact range breakers for feedback signals
• Suitable for contactors requiring auxiliary changeover indication
• Used for local open/closed indication and relay trip signalling

It uses spring-type terminals designed for a front connection with an 8mm wire stripping length to ensure secure, tool-minimised terminations.

The contacts supply ON/OFF status outputs

It carries 5A for many AC control categories up to 690V and varying lower ratings for AC-15 and DC control categories, with reduced currents at higher voltages and for DC categories.

The clip-on mounting enables swift fitting onto compatible devices without additional hardware, aiding modular assembly and maintenance.