Schneider Electric Auxiliary Contact Block, 4 Contact, 4 NO, TeSyS D, Snap-On, 10 A, 690V ac, LADN403

N° de stock RS:: 382-131
Référence fabricant:: LADN403
Fabricant:: Schneider Electric

Schneider Electric Auxiliary Contact Block, 4 Contact, 4 NO, TeSyS D, Snap-On, 10 A, 690V ac, LADN403

Actuellement indisponible

Nous ne savons pas si cet article sera de nouveau en stock, il n'est plus vendu par le fabricant.

Produit de remplacement

Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:

Schneider Electric Auxiliary Contact Block, 4 Contact, 4 NO, TeSys Deca, Front, 6 A, 690V ac, LADN40A

N° de stock RS: 759-197

la pièce

18,95 €

(TVA exclue)

22,93 €

(TVA incluse)

N° de stock RS:: 382-131
Référence fabricant:: LADN403
Fabricant:: Schneider Electric

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Schneider Electric
	Product Type	Auxiliary Contact Block
	Number of Contacts	4
	Normal State Configuration	4 NO
	Series	TeSyS D
	Contact Current	10A
	Mount Type	Snap-On
	Terminal Type	Spring Clamp
	Pole and Throw Configuration	4
	Contact Voltage	690V ac
	Minimum Load	5mA
	Mechanical Durability	30Mcycles
	Rated Insulation Voltage Ui	600V
	Mounting Location	Front
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	70°C
	Standards/Approvals	GB/T 14048.5, EN/IEC 60947-5-1, CSA C22.2 No 60947-5-1, UL 60947-5-1

	Sélectionner tout
	Marque Schneider Electric
	Product Type Auxiliary Contact Block
	Number of Contacts 4
	Normal State Configuration 4 NO
	Series TeSyS D
	Contact Current 10A
	Mount Type Snap-On
	Terminal Type Spring Clamp
	Pole and Throw Configuration 4
	Contact Voltage 690V ac
	Minimum Load 5mA
	Mechanical Durability 30Mcycles
	Rated Insulation Voltage Ui 600V
	Mounting Location Front
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 70°C
	Standards/Approvals GB/T 14048.5, EN/IEC 60947-5-1, CSA C22.2 No 60947-5-1, UL 60947-5-1

Statut RoHS : Exempté

Pays d'origine :: FR

Schneider Electric Auxiliary Contact - LADN TeSys D Series

Are you looking to add an additional auxiliary contact to your control circuit, to provide further safety? Schneider Electric offers the latest in Auxiliary Contact components and technology.

Specifically, the LADN TeSys series of Auxiliary Contactor brings reliability to your circuit by acting as a secondary switching device working in conjunction with other primary devices such as contactors, relays or circuit breakers.

Features and benefits:

• Low consumption on your control circuit

• 30 Mcycles of mechanical durability

• Compact, lightweight and easily attached to compatible contactors. Front side mounting

• Simplified mounting directly to the contactor/circuit breaker. Compact in size and equipped with EverLink terminal technology meaning permanent tightening even in the event with conductor creep

• 18-month manufacturer warranty with Schneider

Protection ratings & Safety features

• IEC 60947-5-1 associated fuse rating

• GG fuse <= 10 A

• BS 4795, EN 60947-5-1, IEC 60947-5-1

• CSA, UL certified

• IP2x Conforming to VDE 0106

• Thermally treated and protected to TH conforming to IEC 60068

• Ambient Air Temperature (AAT) for operation -5 to 60 °C

Applications

• Motor starters/Control systems

• Switching contactors/relay coils

• Control/Signalling equipment

How do Auxiliary Contacts work?

An Auxiliary Contact is an electromechanical device that is mounted typically to contactors. They are physically connected to the contactor, with simultaneous activation and deactivation applying to both of the devices at the same time.

Aux Contacts can be installed onto contactors either by front mounting, or side mounting. This is usually clear in the shape and size of the product, but please check the compatibility of your devices. Aux Contacts are really useful devices to aid in keeping an eye on the contactor.

You can, for example, hook up a low voltage LED directly to the Aux Contactor without having to worry about the overall voltage of the contactor it is linked to (as long the Aux Contactor is electrically isolated from the contactor) you could use the LED to monitor the device i.e. indicate if the motor is off/on.

Note

Tesys D side mount auxiliary contacts (662-6248, 744-6983, 400-1467, 400-1473) are not compatible with Tesys D DC Contactors.