onsemi Microphone, 6-Pin WLCSP
- N° de stock RS:
- 186-1246
- Référence fabricant:
- FAN3852UC16X
- Fabricant:
- onsemi
Sous-total (1 bobine de 3000 unités)*
699,00 €
(TVA exclue)
846,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 3 000 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 3000 + | 0,233 € | 699,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 186-1246
- Référence fabricant:
- FAN3852UC16X
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Amplifier Type | Microphone | |
| Product Type | Audio Amplifier | |
| Application | Microphone | |
| Mount Type | Surface | |
| Number of Channels | 1 | |
| Package Type | WLCSP | |
| Pin Count | 6 | |
| Minimum Operating Temperature | -40°C | |
| GBP - Gain Bandwidth Product | 10MHz | |
| Length | 1.242mm | |
| Height | 0.254mm | |
| Series | FAN3852 | |
| Standards/Approvals | RoHS | |
| Minimum Supply Voltage | 1.8V | |
| Maximum Supply Voltage | 3.63V | |
| Maximum Operating Temperature | 85°C | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Amplifier Type Microphone | ||
Product Type Audio Amplifier | ||
Application Microphone | ||
Mount Type Surface | ||
Number of Channels 1 | ||
Package Type WLCSP | ||
Pin Count 6 | ||
Minimum Operating Temperature -40°C | ||
GBP - Gain Bandwidth Product 10MHz | ||
Length 1.242mm | ||
Height 0.254mm | ||
Series FAN3852 | ||
Standards/Approvals RoHS | ||
Minimum Supply Voltage 1.8V | ||
Maximum Supply Voltage 3.63V | ||
Maximum Operating Temperature 85°C | ||
Automotive Standard No | ||
The FAN3852 integrates a pre-amplifier, LDO, and ADC that converts Electret Condenser Microphone (ECM) outputs to digital Pulse Density Modulation (PDM) data streams. The pre-amplifier accepts analog signals from the ECM and drives an over-sampled sigma delta Analog-to-Digital Converter (ADC) and outputs PDM data. The PDM digital audio has the advantage of noise rejection and easy interface to mobile handset processors. The FAN3852 features an integrated LDO and is powered from the system supply rails up to 3.63V, with low power consumption of only 0.85mW and less than 20μW in Power-Down Mode.
Optimized for Mobile Handset and Notebook PC Microphone Applications
Accepts Input from Electret Condenser Microphones (ECM)
Pulse Density Modulation (PDM) Output
Standard 5-Wire Digital Interface
Low Input Capacitance, High PSR, 20 kHz Pre-Amplifier
Low-Power 1.5μA Sleep Mode
Typical 420μA Supply Current
SNR of 62dB(A) for 16dB Gain
Total Harmonic Distortion 0.02%
Input Clock Frequency Range of 1-4MHz
Integrated Low Drop-Out Regulator (LDO)
1.5kV HBM ESD on MIC Input
End Products
Electret Condenser Microphones with Digital Output
Mobile Handset
Headset Accessories
Personal Computer (PC)
Liens connexes
- onsemi 6-Pin WLCSP FAN3852UC16X
- onsemi FPF2286 Type N-Channel MOSFET 6-Pin WLCSP
- onsemi FPF2286 Type N-Channel MOSFET 6-Pin WLCSP FPF2286UCX
- onsemi Peripheral Controller 6-Pin WLCSP
- Analog Devices 10-Pin MSOP
- onsemi FPF1321UCX High Side 1 Power Switch IC 6-Pin, WLCSP
- onsemi FPF1320UCX Peripheral Controller 6-Pin WLCSP
- onsemi, Voltage Regulator 5.5V WLCSP 6-Pin