ATM90E26-YU-R,Analogue Front End IC, 3-Channel 16 bit, 8kHz, 28-Pin SSOP
- N° de stock RS:
- 177-3162P
- Référence fabricant:
- ATM90E26-YU-R
- Fabricant:
- Microchip
Sous-total 10 unités (conditionné en bande continue)*
12,58 €
(TVA exclue)
15,22 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 350 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 10 + | 1,258 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 177-3162P
- Référence fabricant:
- ATM90E26-YU-R
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Number of ADCs | 3 | |
| Resolution | 16 bit | |
| Sampling Rate | 8kHz | |
| Number of Channels per Chip | 3 | |
| Mounting Type | Surface Mount | |
| Package Type | SSOP | |
| Pin Count | 28 | |
| Power Supply Type | Single | |
| Dimensions | 10.33 x 5.38 x 1.78mm | |
| Height | 1.78mm | |
| Length | 10.33mm | |
| Maximum Operating Supply Voltage | 3.6 V | |
| Maximum Operating Temperature | +85 °C | |
| Width | 5.38mm | |
| Minimum Operating Temperature | -40 °C | |
| Minimum Operating Supply Voltage | 2.8 V | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Number of ADCs 3 | ||
Resolution 16 bit | ||
Sampling Rate 8kHz | ||
Number of Channels per Chip 3 | ||
Mounting Type Surface Mount | ||
Package Type SSOP | ||
Pin Count 28 | ||
Power Supply Type Single | ||
Dimensions 10.33 x 5.38 x 1.78mm | ||
Height 1.78mm | ||
Length 10.33mm | ||
Maximum Operating Supply Voltage 3.6 V | ||
Maximum Operating Temperature +85 °C | ||
Width 5.38mm | ||
Minimum Operating Temperature -40 °C | ||
Minimum Operating Supply Voltage 2.8 V | ||
The ATM90E26 is a high-performance energy metering device for single-phase two-wire, single-phase three-wire or anti-tampering active and reactive energy meters. With the measurement function, the ATM90E26 can also be used in power instruments which need to measure voltage, current, etc.
Additional Features:
Accuracy of 0.1% for active energy and 0.2% for reactive energy over a dynamic range of 5000:1.
Temperature coefficient is 15 ppm/ ℃ (typical) for on-chip reference voltage.
Single-point calibration for active energy, no calibration needed for reactive energy.
Accuracy of 0.1% for active energy and 0.2% for reactive energy over a dynamic range of 5000:1.
Temperature coefficient is 15 ppm/ ℃ (typical) for on-chip reference voltage.
Single-point calibration for active energy, no calibration needed for reactive energy.