Références fabricant

SMC Compressed Air Pipe Clear Polyurethane 10 mm 20 m TU Series

N° de stock RS:: 686-2706
Référence fabricant:: TU1065C-20
Fabricant:: SMC

SMC Compressed Air Pipe Clear Polyurethane 10 mm 20 m TU Series

Voir l’ensemble des Air Hoses

Offre groupée disponible

Consulter les options de prix de gros

Sous-total (1 unité)*

56,62 €

(TVA exclue)

68,51 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

Plus 6 unité(s) expédiée(s) à partir du 14 septembre 2026
Plus 46 unité(s) expédiée(s) à partir du 14 septembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 - 4	56,62 €
5 - 9	54,88 €
10 +	53,13 €

*Prix donné à titre indicatif

N° de stock RS:: 686-2706
Référence fabricant:: TU1065C-20
Fabricant:: SMC

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	SMC
	Product Type	Compressed Air Pipe
	Colour	Clear
	Material	Polyurethane
	Length	20m
	Maximum Operating Pressure	0.8 Mpa
	Application	Water, Air
	Series	TU
	Minimum Operating Temperature	-20°C
	Maximum Operating Temperature	60°C
	Inside Diameter	6.5mm
	Outside Diameter	10mm
	Standards/Approvals	No

	Sélectionner tout
	Marque SMC
	Product Type Compressed Air Pipe
	Colour Clear
	Material Polyurethane
	Length 20m
	Maximum Operating Pressure 0.8 Mpa
	Application Water, Air
	Series TU
	Minimum Operating Temperature -20°C
	Maximum Operating Temperature 60°C
	Inside Diameter 6.5mm
	Outside Diameter 10mm
	Standards/Approvals No

Pays d'origine :: VN

SMC Series TU Compressed Air Pipe, 6.5mm Inside Diameter, 20m Length - TU1065C-20

This compressed Air pipe provides a clear, flexible conduit for conveying compressed Air and water in industrial settings. Constructed from polyurethane, it is supplied as a continuous 20 m length and is intended for use in automation, electrical, electronics and mechanical environments where visible flow and material resilience are required.

Features & Benefits

• Withstands up to 0.8 MPa to support moderate-pressure systems
• Rated for continuous use from -20°C to 60°C for varied climates
• Clear material permits Visual inspection of fluid flow and contamination
• Polyurethane composition offers abrasion resistance and flexibility
• 10mm outside diameter for convenient connection handling

Applications

• Suitable for pneumatic tool supply lines in assembly cells
• Ideal for routing compressed Air to sensors and valves
• Used with water blow-off stations in electronics cleaning
• Can be used for secondary Air distribution in machine frames
• Suitable for temporary compressed Air runs during maintenance

How does the tubing perform under temperature cycling in plant environments?

It retains dimensional stability across the -20°C to 60°C range, minimising stiffening in cold conditions and maintaining flexibility at elevated service temperatures.

What inspections can be carried out without disconnecting the line?

The transparent wall allows Visual checks for bubbles, particulates or water ingress while the system is live, aiding Rapid fault isolation.

How compatible is the material with standard push-fit pneumatic fittings?

The polyurethane wall thickness and 10mm outside diameter provide reliable grip for common push-fit connectors designed for a 6.5mm internal bore.

Can the tubing handle occasional pressure spikes above normal operating pressure?

The nominal maximum operating pressure is 0.8 MPa, so any transient peaks should be evaluated against that constraint and system safety factors.

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.