ITW Devcon Devweld 530 Paste Adhesive, 50 ml
- N° de stock RS:
- 236-8099
- Référence fabricant:
- 20500
- Fabricant:
- ITW Devcon
Offre groupée disponible
Sous-total (1 unité)*
34,37 €
(TVA exclue)
41,59 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 30 unité(s) prête(s) à être expédiée(s)
- Plus 219 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 5 | 34,37 € |
| 6 - 14 | 33,00 € |
| 15 + | 32,31 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 236-8099
- Référence fabricant:
- 20500
- Fabricant:
- ITW Devcon
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ITW Devcon | |
| Product Type | Adhesive | |
| Trade Name | Devweld 530 | |
| Application | Bonding | |
| Material Compatibility | Plastic, Metal, Composite | |
| Colour | White | |
| Product Form | Paste | |
| Package Type | Dual Cartridge | |
| Package Size | 50 ml | |
| Cure Time | 24 h | |
| Minimum Operating Temperature | -55°C | |
| Maximum Operating Temperature | 120°C | |
| Standards/Approvals | No | |
| Viscosity | 40000 to 60000 cP/s | |
| Base Chemical | Acrylic Adhesive | |
| Sélectionner tout | ||
|---|---|---|
Marque ITW Devcon | ||
Product Type Adhesive | ||
Trade Name Devweld 530 | ||
Application Bonding | ||
Material Compatibility Plastic, Metal, Composite | ||
Colour White | ||
Product Form Paste | ||
Package Type Dual Cartridge | ||
Package Size 50 ml | ||
Cure Time 24 h | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature 120°C | ||
Standards/Approvals No | ||
Viscosity 40000 to 60000 cP/s | ||
Base Chemical Acrylic Adhesive | ||
ITW Devcon Paste Acrylic Adhesive
The ITW Devcon 50ml acrylic adhesive is a 2-part structural paste and dispensing system which allows the metering, mixing and accurate application of epoxy and acrylic structural adhesive. It ensures accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. It is made of methacrylate. To apply the adhesive, a system of a 1:1 ratio cartridge (in 3 sizes) application gun and static mixing nozzle is required, each is available separately.
Features and Benefits
• Rapid curing structural adhesive that produces high strength load-bearing bonds
• Minimal surface preparation
• Excellent shear, peel and impact-resistant strength
• Resistant to weathering, moisture and wide variations in temperature
• Substrates -Engineered plastics, metal ceramics and many other materials
• Working time of 4 to 6 minutes
• Fixture time of 12 to 15 minutes
• Cure time of 24 hours
• Viscosity of 40000 to 60000cP/s
• The operating temperature ranges between -55°C and 120°C
Applications
• Composite
• Metal
• Plastic
Liens connexes
- ITW Devcon Devweld 531 Paste Adhesive, 50 ml
- ITW Devcon Floor Patch Paste Adhesive
- ITW Devcon Adhesive
- ITW Devcon DEVCON Plastic Steel 5 Minute Putty (SF) Resin Adhesive
- ITW Devcon 2 Ton Transparent Adhesive, 35 min Set Time
- Araldite ARALDITE 2011 RESIN Paste Adhesive 50 ml
- ITW Devcon Titanium Putty Grey Adhesive, 20 min Set Time
- Bostik Born2Bond GA-WL Paste Anaerobic Gasket Adhesive, 50 ml