STMicroelectronics, AC/DC Converter, 5V 10-Pin, SSOP-10 VIPER114BLS
- N° de stock RS:
- 719-482
- Référence fabricant:
- VIPER114BLS
- Fabricant:
- STMicroelectronics
Actuellement indisponible
Désolés, nous ne savons pas quand ce produit sera réapprovisionné.
- N° de stock RS:
- 719-482
- Référence fabricant:
- VIPER114BLS
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Product Type | AC/DC Converter | |
| Maximum Input Voltage | 30V | |
| Maximum Output Voltage | 5V | |
| Output Power | 250mW | |
| Mount Type | Surface | |
| Pin Count | 10 | |
| Switching Frequency | 60kHz | |
| Package Type | SSOP-10 | |
| Minimum Input Voltage | 4.5V | |
| Topology | Flyback | |
| Minimum Operating Temperature | -40°C | |
| Maximum Duty Cycle | 80% | |
| Maximum Operating Temperature | 150°C | |
| Height | 1.75mm | |
| Width | 4mm | |
| Series | Viper | |
| Length | 5mm | |
| Supply Current | 1.5mA | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Product Type AC/DC Converter | ||
Maximum Input Voltage 30V | ||
Maximum Output Voltage 5V | ||
Output Power 250mW | ||
Mount Type Surface | ||
Pin Count 10 | ||
Switching Frequency 60kHz | ||
Package Type SSOP-10 | ||
Minimum Input Voltage 4.5V | ||
Topology Flyback | ||
Minimum Operating Temperature -40°C | ||
Maximum Duty Cycle 80% | ||
Maximum Operating Temperature 150°C | ||
Height 1.75mm | ||
Width 4mm | ||
Series Viper | ||
Length 5mm | ||
Supply Current 1.5mA | ||
- Pays d'origine :
- CN
The STMicroelectronics high voltage converter smartly integrating an 800 V avalanche-rugged power MOSFET with PWM current mode control. The power MOSFET with 800 V breakdown voltage allows the extended input voltage range to be applied, as well as the size of the DRAIN snubber circuit to be reduced. This IC meets the most stringent energy-saving standards as it has very low consumption and operates in Pulse frequency modulation under light load. The design of fly back, buck and buck boost converters is supported. The integrated HV startup, sense-FET, error amplifier and oscillator with jitter allow a complete application to be designed with the minimum number of components.
Embedded HV startup and sense-FET
Current mode PWM controller
Pulse-skip protection to prevent flux-runaway
Embedded thermal shutdown
Built-in soft-start for improved system reliability
Liens connexes
- STMicroelectronics 5V 10-Pin, SSOP
- STMicroelectronics 5V 10-Pin, SSOP-10 VIPER113BLS
- STMicroelectronics 5V 10-Pin, SSOP VIPER012HSTR
- STMicroelectronics 5V 10-Pin, SSOP VIPER013XSTR
- STMicroelectronics 480 mA Tube VIPER114BLS
- STMicroelectronics SSOP-10
- STMicroelectronics SSOP-10 VIPER122LSTR
- STMicroelectronics 5V 10-Pin, SSOP