3M 339 Aluminium Oxide, 50 mm Diameter, P60 Grit
- N° de stock RS:
- 766-2453
- Référence fabricant:
- FC110075635
- Fabricant:
- 3M
Sous-total (1 boîte de 10 unités)*
52,29 €
(TVA exclue)
63,27 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 11 unité(s) expédiée(s) à partir du 15 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Boîte(s) | La Boite | Prix par unité* |
|---|---|---|
| 1 + | 52,29 € | 5,229 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 766-2453
- Référence fabricant:
- FC110075635
- Fabricant:
- 3M
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | 3M | |
| Abrasive Material | Aluminium Oxide | |
| Product Type | Abrasive Wheel | |
| Grit Size | P60 | |
| Sub Type | Flap Wheel | |
| Diameter | 50mm | |
| Face Width | 10mm | |
| Maximum Safe Speed | 25400rpm | |
| Shank Size | 6mm | |
| Standards/Approvals | No | |
| Series | 339 | |
| Sélectionner tout | ||
|---|---|---|
Marque 3M | ||
Abrasive Material Aluminium Oxide | ||
Product Type Abrasive Wheel | ||
Grit Size P60 | ||
Sub Type Flap Wheel | ||
Diameter 50mm | ||
Face Width 10mm | ||
Maximum Safe Speed 25400rpm | ||
Shank Size 6mm | ||
Standards/Approvals No | ||
Series 339 | ||
Statut RoHS : Exempté
- Pays d'origine :
- PL
3M 339 Series Flap Wheel, 50mm Diameter, 10mm Face Width - FC110075635
This flap wheel is a rotating abrasive tool designed for surface finishing and material removal on metal components within electrical, electronics, mechanical and automation settings. It combines layered abrasive flaps for conformable contact and is intended for attachment to rotary handheld or bench-mounted tools where controlled stock removal and surface blending are required.
Features and Benefits:
• Aluminium oxide abrasive delivers consistent cutting performance • Grit P60 achieves moderate material removal rates • 15,200rpm maximum safe speed permits high-speed operation • 6mm shank enables compatibility with die grinders and small rotary tools • 10mm face provides narrow access for detailed finishing
Applications
• Suitable for deburring machined steel components • Ideal for surface blending on metal chassis and enclosures • Used with die grinders for edge profiling and clean-up • Can be used for polishing weld seams in fabrication
What abrasive type is used and why is it chosen?
It uses aluminium oxide, a Durable abrasive suited to ferrous Metal Work for predictable wear and cutting action.
Which tool interfaces are supported by the mount?
The tool fits devices accepting a 6mm shank, commonly found on die grinders and collet-equipped rotary tools.
What working speed limitations should operators observe?
Operators must not exceed the 15,200rpm safe limit to maintain wheel integrity and avoid failure.
How coarse is the abrasive and what finish can be expected?
The P60 grit provides medium-coarse action, balancing Rapid material removal with a finish suited for subsequent finer sanding or polishing.