RS PRO 2.85 mm Grey PLA Glitter 3D Printer Filament, 500 g
- N° de stock RS:
- 183-0236
- Fabricant:
- RS PRO
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 183-0236
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Material Type | Polylactic Acid | |
| Product Type | 3D Printer Filament | |
| Printing Technology | Fused Deposition Modelling (FDM) | |
| Colour | Grey | |
| For Use With | Common Desktop 3D Printers | |
| Weight | 500g | |
| Diameter | 2.85mm | |
| Printing Material | PLA Glitter | |
| Printing Maximum Temperature | 215°C | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Material Type Polylactic Acid | ||
Product Type 3D Printer Filament | ||
Printing Technology Fused Deposition Modelling (FDM) | ||
Colour Grey | ||
For Use With Common Desktop 3D Printers | ||
Weight 500g | ||
Diameter 2.85mm | ||
Printing Material PLA Glitter | ||
Printing Maximum Temperature 215°C | ||
Standards/Approvals No | ||
- Pays d'origine :
- NL
Poly Lactic Acid (PLA) is a plastic made from renewable natural resources and one of the most popular materials for 3D printing. Plastics such as PLA are the most popular 3D printing material due to its simplicity, dimensional accuracy and low cost.
RS PRO METALLIC PLA is a highly aesthetical PLA based filament with sparkling flakes inside. Slightly modified, the filament retains the typical features of PLA, but is tougher and less brittle. The sparkling flakes helps concealing layer lines. Because of the translucency of PLA combined with the flakes, the colour saturation can be increased by increasing wall thickness. No need for special nozzle as the material is not abrasive. It is recommended to purge the nozzle after printing, to prevent build-up of flakes for the next print
Easy to print at low temperature
Beautiful metallic effect
Low warping
Layers are not visible
Limited smell
Not abrasive
Liens connexes
- RS PRO 2.85 mm Green PLA 3D Printer Filament, 500 g
- RS PRO 2.85 mm Black PLA 3D Printer Filament, 500 g
- RS PRO 2.85 mm Raspberry 500 g
- RS PRO 2.85 mm Purple 500 g
- RS PRO 2.85 mm Grey Tough PLA 3D Printer Filament, 500 g
- RS PRO 2.85 mm Black Tough PLA 3D Printer Filament, 500 g
- RS PRO 2.85 mm Blue Tough PLA 3D Printer Filament, 500 g
- RS PRO 2.85 mm Red Tough PLA 3D Printer Filament, 500 g