Aluminium Capacitors

Aluminium capacitors are a type of electrolytic capacitor. A capacitor is a two-terminal electrical component that can store energy, somewhat like a battery. Aluminium capacitors are polarised, meaning that the energy can only flow in a single direction. High purity grade Aluminium is used to create the anode foil and the cathode foil upon which electrolysis is applied to form an extremely thin insulating layer of aluminium oxide, which acts as the dielectric of the capacitor. Aluminium capacitors are found in many applications such as power supplies, computer motherboards and domestic appliances.

Dependent on the nature of the Electrolyte, capacitors may also be referred to as “wet” meaning they have a liquid electrolyte or solid. Solid Electrolytes may be hybridized with Aluminium but normally refers to Polymer or Tantalum based capacitors


Types of Aluminium Capacitors


Aluminium Electrolytic Capacitors


Electrolytic capacitors consist of an electrolyte which is a liquid or gel that consists of a large concentration of ions, and when voltage is applied across its terminals, it leads to charges being stored on the anode and cathode foils. The electric charge that can be stored by the capacitor is measured in Farads but usually in the range from nanofarads to millifarads. .Aluminium capacitors are used where high capacitance values to provide smoothing and filtering functions in the circuit. Commonly used in DC Power supplies due to their large capacitance and their compact size which helps to reduce the ripple voltage. Aluminium Electrolytic capacitors have reasonable Equivalent Series Resistance (ESR) but have the lowest leakage current from all capacitor types.


Polymer Electrolytic Capacitors


Polymer capacitors (also are known as polymer electrolytic capacitors or polymer e caps) have conductive polymer as their electrolyte material within a layered aluminium design. These capacitors combine unique properties from the polymer material in terms of high conductivity, extended temperature range and no risk of drying out – to make a capacitor that offers large capacitance and very low ESR (equivalent series resistance) with high ripple current capability and offer a longer operating life. Polymer capacitors offer a lot of package options between 2.2 to 470 microfarad


Hybrid Capacitors


Hybrid capacitors (polymer hybrid aluminium capacitors) are a mix of wet electrolyte and solid polymer. In this sense, they combine the best of both electrolytes. These capacitors offer high endurance, low ESR, and a high tolerance for ripple current. Hybrid capacitors also feature stable electric characteristics at high frequencies whilst maintaining reliability. The liquid electrolyte keeps the Leakage current very low and also allows self-repairing of the aluminium foils which prevent a drop in capacitance.


...
Voir plus Voir moins

Filtres

Afficher 81 - 100 des 18396 produits
Nombre de résultats par page
Description Prix Capacitance Technology Voltage Mounting Type Dimensions Height Length Depth Diameter Minimum Operating Temperature Maximum Operating Temperature Lead Pitch Construction Lifetime
N° de stock RS 173-0279
MarqueRS PRO
0,792 €
Each (In a Bag of 200)
Unité
47µF Electrolytic 450V dc Through Hole 16 (Dia.) x 26mm 26mm 26mm - 16mm -25°C +105°C 7.5mm - 2000h
N° de stock RS 707-5705
MarqueRS PRO
0,07 €
Each (In a Pack of 100)
Unité
22µF Electrolytic 50V dc Through Hole 6 (Dia.) x 7mm 7mm 7mm - 6mm -40°C +105°C 2.5mm - 1000h
N° de stock RS 170-1143
MarqueRS PRO
1,875 €
Each (In a Bag of 50)
Unité
2200µF Electrolytic 50V dc Through Hole 18 (Dia.) x 36mm 36mm 36mm - 18mm -40°C +105°C - - 1000h
N° de stock RS 170-1196
MarqueRS PRO
0,083 €
Each (In a Bag of 1000)
Unité
470µF Electrolytic 25V dc Through Hole 8 (Dia.) x 14mm 14mm 14mm - 8mm -40°C +105°C 3.5mm - 2000h
N° de stock RS 170-1087
MarqueRS PRO
0,167 €
Each (In a Bag of 500)
Unité
22µF Electrolytic 25V dc Through Hole 6 (Dia.) x 13mm 13mm 13mm - 6mm -40°C +105°C - - 1000h
N° de stock RS 711-0864
MarqueRS PRO
0,368 €
Each (In a Pack of 10)
Unité
2200µF Electrolytic 10V dc Through Hole 10 (Dia.) x 20mm 20mm 20mm - 10mm -40°C +105°C 5mm - 2000h
N° de stock RS 170-1130
MarqueRS PRO
0,667 €
Each (In a Bag of 200)
Unité
470µF Electrolytic 50V dc Through Hole 13 (Dia.) x 26mm 26mm 26mm - 13mm -40°C +105°C - - 1000h
N° de stock RS 170-1214
MarqueRS PRO
0,083 €
Each (In a Bag of 1000)
Unité
100µF Electrolytic 35V dc Through Hole 8 (Dia.) x 11mm 11mm 11mm - 8mm -40°C +105°C 3.5mm - 2000h
N° de stock RS 711-1396
MarqueRS PRO
0,027 €
Each (In a Pack of 100)
Unité
100nF Electrolytic 50V dc Through Hole 5 (Dia.) x 11mm 11mm 11mm - 5mm -40°C +105°C 2mm - 1000h
N° de stock RS 707-6502
MarqueRS PRO
0,308 €
Each (In a Pack of 25)
Unité
47µF Electrolytic 25V dc Through Hole 6 (Dia.) x 13mm 13mm 13mm - 6mm -40°C +105°C - - 1000h
N° de stock RS 707-6679
MarqueRS PRO
3,275 €
Each (In a Pack of 2)
Unité
2200µF Electrolytic 50V dc Through Hole 18 (Dia.) x 36mm 36mm 36mm - 18mm -40°C +105°C - - 1000h
N° de stock RS 170-1046
MarqueRS PRO
0,02 €
Each (In a Bag of 2000)
Unité
4.7µF Electrolytic 50V dc Through Hole 4 (Dia.) x 7mm 7mm 7mm - 4mm -40°C +105°C 1.5mm - 1000h
N° de stock RS 711-1539
MarqueRS PRO
1,555 €
Each (In a Pack of 2)
Unité
6800µF Electrolytic 50V dc Through Hole 25 (Dia.) x 44mm 44mm 44mm - 25mm -40°C +105°C 12mm - 2000h
N° de stock RS 711-2141
MarqueRS PRO
1,50 €
Each (In a Pack of 2)
Unité
47µF Electrolytic 450V dc Through Hole 16 (Dia.) x 26mm 26mm 26mm - 16mm -25°C +105°C 7.5mm - 2000h
N° de stock RS 706-3503
MarqueRS PRO
5,97 €
Each
Unité
33000µF Electrolytic 16V dc Through Hole 30 (Dia.) x 45mm 45mm 45mm - 30mm -40°C +105°C 10mm - 2000h
N° de stock RS 711-1343
MarqueRS PRO
0,422 €
Each (In a Pack of 5)
Unité
1500µF Electrolytic 35V dc Through Hole 13 (Dia.) x 26mm 26mm 26mm - 13mm -40°C +105°C 5mm - 2000h
N° de stock RS 707-6631
MarqueRS PRO
1,038 €
Each (In a Pack of 5)
Unité
470µF Electrolytic 50V dc Through Hole 13 (Dia.) x 26mm 26mm 26mm - 13mm -40°C +105°C - - 1000h
N° de stock RS 170-1272
MarqueRS PRO
0,125 €
Each (In a Bag of 1000)
Unité
100µF Electrolytic 63V dc Through Hole 10 (Dia.) x 12mm 12mm 12mm - 10mm -40°C +105°C 5mm - 2000h
N° de stock RS 170-1230
MarqueRS PRO
0,25 €
Each (In a Bag of 250)
Unité
1000µF Electrolytic 35V dc Through Hole 13 (Dia.) x 16mm 16mm 16mm - 13mm -40°C +105°C 5mm - 2000h
N° de stock RS 711-1400
MarqueRS PRO
0,032 €
Each (In a Pack of 100)
Unité
330nF Electrolytic 50V dc Through Hole 5 (Dia.) x 11mm 11mm 11mm - 5mm -40°C +105°C 2mm - 1000h