INA Pulley, Steel
- N° de stock RS:
- 137-1818
- Référence fabricant:
- RSRB16117L0
- Fabricant:
- INA
7 En stock pour livraison sous 1 jour(s)
Ajouté
Prix la pièce
39,84 €
(TVA exclue)
48,21 €
(TVA incluse)
| Unité | Prix par unité |
| 1 - 4 | 39,84 € |
| 5 - 9 | 38,25 € |
| 10 - 24 | 37,45 € |
| 25 + | 36,66 € |
- N° de stock RS:
- 137-1818
- Référence fabricant:
- RSRB16117L0
- Fabricant:
- INA
Documentation technique
Législations et de normes
Détails du produit
Belt Tension Pulleys
INA from Schaeffler Idler pulley units are tensioning systems for belt drives and idler units. The ready-to-fit units comprise deep drawn, profiled sheet steel pulley halves riveted together and deep groove ball bearings. Pulleys of larger diameters are also welded together. A lead chamfer on the pulley profile prevents damage to the belt. Due to the sheet steel construction, the additional rotating masses and the out of balance masses generated are low.
Features and Benefits
• Increase the wrap angle in belt drives and can therefore support higher power levels or allow smaller units to be used
• Compensate for belt stretch resulting from operation
• Allow shorter centre distances
• Reduce the wear on the belt drive
Product Application Information
Belt tension pulleys can be used with flat belts, vee belts and round belts.
INA
Spécifications
Attribut | Valeur |
|---|---|
| Bore | 16mm |
| Overall Diameter | 117mm |
| Material | Steel |