RS PRO RS Series Axial Fixed Resistor 10kΩ ±5% 0.25W -500 → +350ppm/°C

  • N° de stock RS 707-7745
  • Fabricant RS Pro
Documentation technique
Législations et de normes
Déclaration de conformité RoHS
Pays d'origine : TW
Détails du produit

Carbon Film Resistors 0.25W

The RS series of carbon film axial leaded resistors offer excellent long-term stability, and feature standard solder-plated copper leads. Applications include automotive, telecommunication, and medical equipment.

Features and Benefits

Available in resistances from 1 Ohm to 9.1 mOhm
0.25W power rating
5% tolerance
Resistor body 2.3 mm in diameter, 6.3 mm in length
Carbon film construction
Long-term stability
Solder plated copper leads

Benefits of Carbon Composition

Carbon composition resistors are made from a moulded carbon powder that has been mixed with a phenolic resin to bind and create a uniform resistive body. It is then surrounded in an insulating case after attaching end leads. Carbon composition resistors are used in applications in which the initial tolerance does not need to be any closer than +/- 5% of the value.

What does the power rating mean?

The power rating of a resistor describes the amount of power that the resistor can dissipate safely.

What do the colours mean?

Each of the colour bands has a specific meaning. The first two colours give the base value of the resistor, the next gives the multiplier and the final band the tolerance. If a resistor has five bands, it is a more precise resistor, in which the first three bands represent the base values, and the fourth and fifth represent the multiplier and tolerance respectively.

Power at 70°C 0.25W
Resistance Tolerance ±5%
Temperature Coefficient  
<100KΩ +350ppm to -500ppm
100KΩ to 1MΩ 0ppm to -700ppm
>1MΩ 0ppm to -1500ppm
Operating Temperature -55 to +155 °C
Lead length 28mm
Lead diameter 0.55mm ±0.03mm

A comprehensive range of high stability carbon film resistors qualified and tested to the requirements of IEC 115 and IEC 115-2. The ruggedised welded cap and lead method of manufacture provides a considerable strength and resistance to damage. The coating materials and the colour bands are epoxy resin and are highly resistant to solvents, abrasion and chipping.,Improvements in materials and processing have allowed the rated power to be improved. Excellent stability against changes in load conditions or moisture levels, with a low noise level and high reliability make these carbon film resistors suitable for a wide range of applications.,Rated at 70°C in free air mounted horizontally.,Climatic category 55/155/56.

Spécifications
Attribut Valeur
Resistance 10 kΩ
Power Rating 0.25W
Tolerance ±5%
Technology Carbon Film
Series RS
Case Style Ceramic
Temperature Coefficient -500 → +350ppm/°C
Termination Style Axial
Dimensions 2.3 (Dia.) x 6.3mm
Length 6.3mm
Diameter 2.3mm
Minimum Temperature Coefficient -500ppm/°C
Maximum Temperature Coefficient +350ppm/°C
Maximum Operating Temperature +155°C
Minimum Operating Temperature -55°C
Lead Diameter 0.55mm
6270 Livraison dès le lendemain
46880 Sous 1 jours (stock Europe)
Prix Each (In a Pack of 10)
0,13
(TVA exclue)
0,16
(TVA incluse)
Unité
Prix par unité
le paquet*
10 - 490
0,13 €
1,30 €
500 - 990
0,013 €
0,13 €
1000 - 2490
0,011 €
0,11 €
2500 - 4990
0,01 €
0,10 €
5000 +
0,009 €
0,09 €
*prix conseillé
Options de conditionnement :