GP1S173LCS2F Sharp, Snap-In Slotted Optical Switch, Phototransistor Output

  • N° de stock RS 146-0719
  • Référence fabricant GP1S173LCS2F
  • Fabricant Sharp
Documentation technique
Législations et de normes
Déclaration de conformité RoHS
Pays d'origine : CN
Détails du produit

GP1S173LCS2F is a standard, phototransistor output, transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For this family of devices, the emitter and detector are inserted in a case, and a 3-pin connector is included to allow remote-mount or off-board designs.

Transmissive with phototransistor output
Highlights Special position hooks compatible with 3 different Plate thicknesses (1.0, 1.2, 1.6mm), Snap insertion
Key Parameters Gap Width : 5mm, Slit Width (detector side) : 0.5mm, Package : 17 ´ 12.8 ´ 8mm (without connector and hooks), Connector : Tyco Electronics JAPAN G.K. (173977-3 and 179228-3)
RoHS directive compliant

Spécifications
Attribut Valeur
Output Device Phototransistor
Number of Channels 1
Typical Rise Time 3µs
Typical Fall Time 4µs
Mounting Type Snap-In
Number of Pins 5
Dimensions 27.1 x 9.8 x 16.3mm
Height 16.3mm
Length 27.1mm
Maximum Operating Temperature -30°C
Minimum Operating Temperature +95°C
Slot Width 4.3mm
Width 9.8mm
Series GP1S173L
Operating Temperature Range -30 → +95°C
Output Signal Type Analogue
1600 En stock pour livraison sous 1 jour(s)
Prix Each (In a Tray of 200)
0,957
(TVA exclue)
1,158
(TVA incluse)
Unité
Prix par unité
le plateau*
200 +
0,957 €
191,40 €
*prix conseillé