INA HK15202RSL271 15mm I.D Drawn Cup Needle Roller Bearing, 21mm O.D
- N° de stock RS:
- 137-1741
- Référence fabricant:
- HK15202RSL271
- Fabricant:
- INA
6 En stock pour livraison sous 1 jour(s)
Ajouté
Prix la pièce
10,22 €
(TVA exclue)
12,37 €
(TVA incluse)
| Unité | Prix par unité |
| 1 - 4 | 10,22 € |
| 5 - 9 | 9,81 € |
| 10 - 24 | 9,61 € |
| 25 + | 9,40 € |
- N° de stock RS:
- 137-1741
- Référence fabricant:
- HK15202RSL271
- Fabricant:
- INA
Documentation technique
Législations et de normes
- Pays d'origine :
- DE
Détails du produit
Drawn Cup Needle Roller Bearings
INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete unit.
Most the bearings are of a single row design and do not have a lubrication hole. Double row designs have a lubrication hole and the suffix ZW.
Features and Benefits
• Lower operating costs
• Reduced maintenance due to improved lubrication
• Lower heat generation
• Less noise
Product Application Information
These bearings allow the design of compact and easy‑to‑fit bearing arrangements with high radial load carrying capacity.
Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft.
Suffixes
2RS - Contact seals on both sides
RS - Contact seal on one side
ZW - Double row design, with lubrication hole
INA
Spécifications
Attribut | Valeur |
|---|---|
| Inside Diameter | 15mm |
| Outside Diameter | 21mm |
| Roller Bearing Type | Drawn Cup Needle |
| Race Width | 20mm |
| Bore Type | Parallel |
| Material | Steel |
| Static Load Rating | 14400N |
| Cage Material | Sheet Steel |
| Number of Rows | 1 |
| Dynamic Load Rating | 10500N |
| End Type | Sealed |
| Limiting Speed | 9900rpm |
| Fatigue Limit Load | 1780N |
| Maximum Speed - Grease | 9900rpm |