- N° de stock RS:
- 506-220
- Référence fabricant:
- 32006 X
- Fabricant:
- SKF
3 En stock, livraison sous 1 jour(s) (stock Europe)
23 En stock, livraison sous 3 à 5 jours (stock Europe)
Ajouté
Prix la pièce
23,03 €
(TVA exclue)
27,87 €
(TVA incluse)
Unité | Prix par unité |
1 - 4 | 23,03 € |
5 - 9 | 22,11 € |
10 - 24 | 21,65 € |
25 + | 21,19 € |
- N° de stock RS:
- 506-220
- Référence fabricant:
- 32006 X
- Fabricant:
- SKF
Documentation technique
Législations et de normes
Statut RoHS non applicable
- Pays d'origine :
- IN
Détails du produit
SKF Tapered Roller Bearing, 55mm OD, 30mm ID - 32006 X
This single-row tapered roller bearing from SKF is suitable for handling radial loads combined with single-direction axial loads. Its limiting speed of 12,000rpm makes it suitable for very high speeds of rotation. As the contact angle increases, so does the axial load-carrying capacity of the bearing. It's an open-end type bearing, which makes it well-suited for use in clean environments, where there's no need to protect the raceway from dirt. The open end allows the lubricant to travel freely to support smooth running.
• Tapered bore allows the transfer of a load evenly while rolling
• Static load rating of 44kN means it's suitable for carrying very high loads
• Static load rating of 44kN means it's suitable for carrying very high loads
Applications
• Wind energy equipment
• Machine tools
• Steel mills
• Machine tools
• Steel mills
Why are single-row tapered roller bearings mounted in pairs?
Single-row tapered roller bearings can take axial loads in one direction only. For this reason, they're usually mounted against a second tapered roller bearing, in order to handle the forces generated in the bearing by radial loads as well as the axial loads in both directions.
Spécifications
Attribut | Valeur |
---|---|
Inside Diameter | 30mm |
Outside Diameter | 55mm |
Roller Bearing Type | Taper |
Race Width | 17mm |
Bore Type | Tapered |
Static Load Rating | 44kN |
Number of Rows | 1 |
Dynamic Load Rating | 43.9kN |
End Type | Open |
Reference Speed | 10000rpm |
Limiting Speed | 12000rpm |
Fatigue Limit Load | 4.55kN |