- N° de stock RS:
- 230-5617
- Référence fabricant:
- MS123
- Fabricant:
- Innomaker
39 En stock, livraison sous 1 jour(s) (stock Europe)
220 En stock, livraison sous 3 à 5 jours (stock Europe)
Ajouté
Prix la pièce
38,48 €
(TVA exclue)
46,56 €
(TVA incluse)
Unité | Prix par unité |
1 - 4 | 38,48 € |
5 - 9 | 37,87 € |
10 + | 37,49 € |
- N° de stock RS:
- 230-5617
- Référence fabricant:
- MS123
- Fabricant:
- Innomaker
Documentation technique
Législations et de normes
- Pays d'origine :
- CN
Détails du produit
InnoMaker USB-CAN analyzer converter module is a plug and play and bi-directional port powered USB to CAN converter which realizes long-distance communication between your Raspberry Pi and other devices stably though CAN- Bus connection. Compatible with Raspberry Pi Zero/Zero W/2B/3B/3B+/4B.
With small size and convenient operation, Its a cost-effective solution that are safe and reliable for all your data-conversion / device-protection applications for any experienced engineer interfacing to expensive industrial equipment yet simple enough for home use by an amateur hobbyist.
CAN: D-SUB, 9 pins
USB: USB 2.0 Full-Speed, Micro USB
Specification: 2.0A (standard format) and 2.0B (extended format), ISO 11898-2 High-speed CAN
Data Rate: From 20kbps to 1Mbps can be programmed arbitrarily
Isolation Voltage: 1.5K VDC/min, 3K VDC/1s
Microcontroller: STM32F0, 48MHz
Termination: 120 Ohm resistor selectable jumper
CAN Transceiver: ISO1050DUBR ,Texas Instruments
Work Temperature: -40°∼ 85°
Relative humidity: 15-90%, not condensing
PCBA Size (L * W * H): 56.50mm * 31.20mm * 14.20mm
Weight: 15.5 g
USB: USB 2.0 Full-Speed, Micro USB
Specification: 2.0A (standard format) and 2.0B (extended format), ISO 11898-2 High-speed CAN
Data Rate: From 20kbps to 1Mbps can be programmed arbitrarily
Isolation Voltage: 1.5K VDC/min, 3K VDC/1s
Microcontroller: STM32F0, 48MHz
Termination: 120 Ohm resistor selectable jumper
CAN Transceiver: ISO1050DUBR ,Texas Instruments
Work Temperature: -40°∼ 85°
Relative humidity: 15-90%, not condensing
PCBA Size (L * W * H): 56.50mm * 31.20mm * 14.20mm
Weight: 15.5 g
1 x USB to CAN Converter
1 x Terminal Block
1 x USB Cable
1 x Terminal Block
1 x USB Cable
Packing List:
Spécifications
Attribut | Valeur |
---|---|
Product Name | USB to CAN Convertor |
Accessory Category | Communication |
Form Factor | Addon |
- N° de stock RS:
- 230-5617
- Référence fabricant:
- MS123
- Fabricant:
- Innomaker