- N° de stock RS:
- 122-8288
- Référence fabricant:
- DFM2310000
- Fabricant:
- DeWALT
Fonctionnalité momentanément indisponible, veuillez nous contacter
Ajouté
Prix 1 boîte de 50
60,91 €
(TVA exclue)
73,70 €
(TVA incluse)
Boîte(s) | La Boite | Prix par unité* |
1 + | 60,91 € | 1,218 € |
*prix conseillé |
- N° de stock RS:
- 122-8288
- Référence fabricant:
- DFM2310000
- Fabricant:
- DeWALT
Législations et de normes
- Pays d'origine :
- TW
Détails du produit
DeWALT Snake Anchors
The range of DeWALT internal threaded snake anchors have been designed to give excellent holding strength and complete grip over the length of the anchor. The self-tapping snake anchor is an excellent choice for overhead suspensions where a normal drop-in anchor is not enough.
The snake cuts a groove into the material it is used in, making it become part of the base material.
The snake cuts a groove into the material it is used in, making it become part of the base material.
Features and Benefits
Quick to install
Fully removable
Can be reused
Versatile
Approved for small edge distances
Complete grip over total anchor length
A shallow embedment depth
Fully removable
Can be reused
Versatile
Approved for small edge distances
Complete grip over total anchor length
A shallow embedment depth
Typical Applications
For cable channels, cable trays, lighting, pipes, suspended conduit, fire sprinklers, formwork and many more.
Note
For installation instructions and information on loading conditions refer to the Snake datasheet.
Can be installed using a wrench or power tool.
A setting tool is required.
Can be installed using a wrench or power tool.
A setting tool is required.
Standards
ETA Option 1 approval for cracked and uncracked concrete
Spécifications
Attribut | Valeur |
---|---|
Type | Anchor |
Fixing Hole Diameter | 12.7mm |
Length | 31mm |
Material | Steel |