- N° de stock RS:
- 768-2501
- Référence fabricant:
- Loctite 5800 50ml
- Fabricant:
- Loctite
49 En stock, livraison sous 1 jour(s) (stock Europe)
32 En stock, livraison sous 3 à 5 jours (stock Europe)
Ajouté
Prix la pièce
42,79 €
(TVA exclue)
51,78 €
(TVA incluse)
Unité | Prix par unité |
1 - 5 | 42,79 € |
6 - 14 | 41,07 € |
15 + | 40,23 € |
- N° de stock RS:
- 768-2501
- Référence fabricant:
- Loctite 5800 50ml
- Fabricant:
- Loctite
Législations et de normes
- Pays d'origine :
- IE
Détails du produit
Loctite Thread lock
The Loctite 5800 50ml red thread lock is a single component, medium strength, anaerobic sealant which cures when confined in the absence of air between close-fitting metal surfaces. This sealant is made of di-methacrylate ester material. It provides resistance to low-pressures immediately after assembly of flanges. This product is typically used as a form-in-place gasket on rigid flanged connections. It carries no hazard symbols, risk or safety phrases and does not contain any declarable carcinogens, mutagens or reproductive toxins.
Note:
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.
Note:
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.
Features and Benefits
General purpose liquid thread sealant for close-fitting joints between rigid metal faces and flanges
Excellent chemical and temperature resistance of cured product
Instant low-pressure seal
Excellent oil resistance and water / glycol resistance
For machined, rigid flanges
Medium strength
Cure time is 24 hours
Operating temperature ranges between -55°C and 180°C
Viscosity measurement of 150000mPa/s
No hazard symbols, no risk phrases & no safety phrases
Excellent chemical and temperature resistance of cured product
Instant low-pressure seal
Excellent oil resistance and water / glycol resistance
For machined, rigid flanges
Medium strength
Cure time is 24 hours
Operating temperature ranges between -55°C and 180°C
Viscosity measurement of 150000mPa/s
No hazard symbols, no risk phrases & no safety phrases
Applications
Gearboxes
Engine casings
Sealing joints between rigid metal faces and flanges
Engine casings
Sealing joints between rigid metal faces and flanges
Spécifications
Attribut | Valeur |
---|---|
Application | Gasketing |
Colour | Red |
Maximum Operating Temperature | +180°C |
Minimum Operating Temperature | -55°C |
Package Size | 50 ml |
Product Form | Liquid |
Trade Name | Loctite 5800 |
Package Type | Bottle |
Cure Time | 24 h |
Special Features | Anaerobic |
Viscosity Measurement | 150000mPa/s |
Operating Temperature Range | -55 → +180 °C |
Odour | Characteristic |
Chemical Composition | Dimethacrylate Ester |