- N° de stock RS:
- 768-5881
- Référence fabricant:
- E3FA-RP21
- Fabricant:
- Omron
18 En stock, livraison sous 1 jour(s) (stock Europe)
100 En stock, livraison sous 3 à 5 jours (stock Europe)
Ajouté
Prix la pièce
76,90 €
(TVA exclue)
93,05 €
(TVA incluse)
Unité | Prix par unité |
1 + | 76,90 € |
- N° de stock RS:
- 768-5881
- Référence fabricant:
- E3FA-RP21
- Fabricant:
- Omron
Documentation technique
Législations et de normes
Détails du produit
E3FA Compact Photoelectric Sensors
The E3FA range of compact photoelectric sensors from Omron are simple and quick to mount and easy to set up due to the large adjuster and high power LED indicator making alignment easier. The status LED indicators of these photoelectric sensors can also be seen easily, from long distances and wide angles. The E3FA series sensors are typically installed in industrial plants such as food and beverage, textiles, food and logistics and are also designed especially for non stop detection for areas where machines never stop.
Cylindrical straight type
Compact design
Plastic housing
Visible LED light for easy alignment
LED indication
Light-ON/Dark-ON selectable by wiring
Reversed power supply polarity protection, output short circuit protection and reversed output polarity protection
Compact design
Plastic housing
Visible LED light for easy alignment
LED indication
Light-ON/Dark-ON selectable by wiring
Reversed power supply polarity protection, output short circuit protection and reversed output polarity protection
OMRON Photoelectric Sensor, LED Beam, PNP Output Type - E3F Series - E3FA-RP21
Round off your conveyor setup with this barrel sensor from OMRON. It detects the presence of objects using the photoelectric method, sensing items at distances between 100mm and 4m so you can customise it to work with your belt width. This retroreflective device combines an emitter and receiver, saving installation time and space. You can use reflector tape (215-5391) to bounce the beam back, keeping the system compact. As the sensor is suitable for flush mounting on the side of the conveyor, you can streamline your automation further.
Features & Benefits
IP69K rating means it's dust-tight and resistant to hot, high-pressure water jets
MSR function and polarised LED for reliably detecting objects with mirror-like surfaces
Dark-on and light-on functions for customising your detection and signalling processes
Visible red beam makes it a doddle to line up your target
Strong ABS housing is resistant to wear and impact
MSR function and polarised LED for reliably detecting objects with mirror-like surfaces
Dark-on and light-on functions for customising your detection and signalling processes
Visible red beam makes it a doddle to line up your target
Strong ABS housing is resistant to wear and impact
Applications
Assembly lines
Packaging equipment
Food processing
Warehouses
Packaging equipment
Food processing
Warehouses
How do I adjust the settings on this photoelectric sensor?
You can manually adjust the settings via a switch on the sensor's housing. For convenience, there are grooves on the switch for you to turn it with a slotted or Phillips screwdriver.
E3F2 Series Barrel
Output can be configured by wiring either light ON or dark ON
Built in amplifier
Short circuit and reverse polarity protection
M18 DIN size cylindrical housing
Built in amplifier
Short circuit and reverse polarity protection
M18 DIN size cylindrical housing
Spécifications
Attribut | Valeur |
---|---|
Sensor Style | Barrel |
Detection Type | Retroreflective |
Detection Range | 100 mm → 4 m |
Output Type | PNP |
Electrical Connection | M12 4 Pin Connector |
Switching Mode | Light / Dark switching |
Maximum DC Voltage | 30V |
Light Source | LED |
IP Rating | IP67, IP69K |
Maximum Current | 25 mA |
Response Time | 500 μs |
Series | E3F |
Minimum Operating Temperature | -25°C |
Maximum Operating Temperature | +55°C |
Housing Material | ABS |
Mounting Type | Flange Mount |
Standards Met | CE |
Thread Size | M18 |
- N° de stock RS:
- 768-5881
- Référence fabricant:
- E3FA-RP21
- Fabricant:
- Omron