- N° de stock RS:
- 295-0682
- Référence fabricant:
- 17-X828
- Fabricant:
- Molex Premise Networks
3 En stock pour livraison sous 1 jour(s)
Prix total (1 Unité)
35,77 €
(TVA exclue)
43,28 €
(TVA incluse)
Unité | Prix par unité |
1 + | 35,77 € |
- N° de stock RS:
- 295-0682
- Référence fabricant:
- 17-X828
- Fabricant:
- Molex Premise Networks
Cat 5e Wallplates
Single, double and quad outlet wallplates with fully shuttered category 5e RJ45 sockets. The KATT IDC punchdown terminations are very low profile increasing allowable cable space within a backbox or trunking. Terminations are colour coded to follow 568B wiring. Snap-in labels on each wallplate will allow quick identification of sockets. Wallplates will mount on BS1363 pattresses and boxes. Fixing screws supplied. Use punchdown tool for termination of wires, see Punchdown IDC Tooling.
Molex Wallplate, 23.5mm Depth, Shuttered - 17-X828
Keep your Ethernet connection ports tidy and out of harm's way with this wallplate from Molex. It's specifically designed for CAT5e RJ45 connections, so you can be sure of a precise fit. The wallplate has four fully shuttered sockets to accept and protect multiple connections. Thanks to compact dimensions of 86 (L) x 145 (W) x 23.5mm (D), you can fit a lot of networking capacity into a relatively small space.
Features & Benefits
Colour-coded terminations help you follow standard 568B wiring
Fixing screws supplied for quick installation, without the need to rummage in your toolbox
Designed for UTP wires, so you get a compact setup and minimal crosstalk
Low-profile punch-down terminations allow for more cable space
Fixing screws supplied for quick installation, without the need to rummage in your toolbox
Designed for UTP wires, so you get a compact setup and minimal crosstalk
Low-profile punch-down terminations allow for more cable space
Applications
Office networking
Manufacturing facilities
Telecommunications networks
Manufacturing facilities
Telecommunications networks
Can I label the sockets?
Yes, the wallplate comes with convenient snap-in labels above the sockets, so you can label them for easy identification.
Attribut | Valeur |
---|---|
Type | Face Plate |
LAN Category | Cat5e |
Number of Outlets | 4 |
Shield Type | UTP |
Interface Type | RJ45 |
Number of Ways | 4 |
Shuttered | Yes |
Length | 86mm |
Width | 145mm |
Depth | 23.5mm |
- N° de stock RS:
- 295-0682
- Référence fabricant:
- 17-X828
- Fabricant:
- Molex Premise Networks
Cat 5e Wallplates
Single, double and quad outlet wallplates with fully shuttered category 5e RJ45 sockets. The KATT IDC punchdown terminations are very low profile increasing allowable cable space within a backbox or trunking. Terminations are colour coded to follow 568B wiring. Snap-in labels on each wallplate will allow quick identification of sockets. Wallplates will mount on BS1363 pattresses and boxes. Fixing screws supplied. Use punchdown tool for termination of wires, see Punchdown IDC Tooling.
Molex Wallplate, 23.5mm Depth, Shuttered - 17-X828
Keep your Ethernet connection ports tidy and out of harm's way with this wallplate from Molex. It's specifically designed for CAT5e RJ45 connections, so you can be sure of a precise fit. The wallplate has four fully shuttered sockets to accept and protect multiple connections. Thanks to compact dimensions of 86 (L) x 145 (W) x 23.5mm (D), you can fit a lot of networking capacity into a relatively small space.
Features & Benefits
Colour-coded terminations help you follow standard 568B wiring
Fixing screws supplied for quick installation, without the need to rummage in your toolbox
Designed for UTP wires, so you get a compact setup and minimal crosstalk
Low-profile punch-down terminations allow for more cable space
Fixing screws supplied for quick installation, without the need to rummage in your toolbox
Designed for UTP wires, so you get a compact setup and minimal crosstalk
Low-profile punch-down terminations allow for more cable space
Applications
Office networking
Manufacturing facilities
Telecommunications networks
Manufacturing facilities
Telecommunications networks
Can I label the sockets?
Yes, the wallplate comes with convenient snap-in labels above the sockets, so you can label them for easy identification.
Attribut | Valeur |
---|---|
Type | Face Plate |
LAN Category | Cat5e |
Number of Outlets | 4 |
Shield Type | UTP |
Interface Type | RJ45 |
Number of Ways | 4 |
Shuttered | Yes |
Length | 86mm |
Width | 145mm |
Depth | 23.5mm |